 | |
| Illustration 1 | g00432078 |
(1) Torque for six bolts that fasten the stator to the carrier ... 30 ± 5 N·m (22 ± 4 lb ft)
(2) Torque for eight bolts that fasten the gear assembly to the impeller ... 30 ± 5 N·m (22 ± 4 lb ft)
(3) Torque for eight bolts that fasten the cover to the carrier ... 50 ± 10 N·m (37 ± 7 lb ft)
(4) Torque for one bolt that fastens the retainer to the shaft ... 120 ± 15 N·m (89 ± 11 lb ft)
(5) Torque for one bolt that fastens the retainer to the shaft ... 120 ± 20 N·m (89 ± 15 lb ft)
(6) Torque for six bolts that fasten the retainer to the housing ... 50 ± 7 N·m (37 ± 5 lb ft)
(7) Torque for 24 bolts that fasten the impeller to the housing ... 30 ± 5 N·m (22 ± 4 lb ft)
(8) Outside diameter of a new carrier in the bearing area ... 88.913 ± 0.013 mm (3.5005 ± 0.0005 inch)
(8) Inside diameter of a new bearing after the installation of the gear ... 89.027 ± 0.038 mm (3.5050 ± 0.0015 inch)
Torque Converter Clearance Chart
| Clearance Between the Components | Diameter Across the Components | Running (1) | |
|---|---|---|---|
| (A) The Stator and Impeller | new | 0.30 to 0.45 mm (0.012 to 0.018 inch) |
0.15 to 0.23 mm (0.006 to 0.009 inch) |
| max wear | 0.76 mm (0.030 inch) |
0.38 mm (0.015 inch) |
|
| (B) The Stator and Turbine | new | 0.30 to 0.45 mm (0.012 to 0.018 inch) |
0.15 to 0.23 mm (0.006 to 0.009 inch) |
| max wear | 0.76 mm (0.030 inch) |
0.38 mm (0.015 inch) |
|
| ( 1 ) | Half the clearance across the diameter |