Accumulator (Steering) - Disassemble
Disassembly Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 7S-5437     | Nitrogen Charging Group     | 1     |
B     | 1U-5551     | Valve Extension     | 1     |
Start By:
- Remove the steering accumulator. Refer to Disassembly and Assembly, "Accumulator (Steering) - Remove and Install" for the correct procedure.
- Place the steering accumulator on a suitable bench. Remove cover (12) .
Show/hide table
Illustration 1 | g00392868 |
Show/hide table
Illustration 2 | g00392875 |
Show/hide table
Illustration 3 | g00392997 |
- Remove valve guard (1) and O-ring seal (13) .
- Remove seal (2) from the accumulator.
- Use a valve core tool in order to release the precharge pressure from the accumulator bladder. Remove valve core (3) .
Show/hide table
Illustration 4 | g00393000 |
Show/hide table
Illustration 5 | g00393002 |
Show/hide table
Personal injury can result from the sudden release of high pressure oil. Be sure the engine has been shut off for a minimum of five minutes to ensure that the accumulator pressure is zero. The accumulator is filled with dry nitrogen. Do not loosen or remove the valve or the cap from the top of the accumulator. |
Note: The accumulator contains nitrogen gas that is under high pressure. Do not attempt to disassemble the accumulator until the pressure has been released.
- Detach bladder (11) from accumulator valve (10) by unscrewing nut (4) .
Show/hide table
Illustration 6 | g00393005 |
Show/hide table
Illustration 7 | g00393009 |
- Remove nut (5). Nut (5) is externally located on accumulator valve (10) .
Show/hide table
Illustration 8 | g00393011 |
Show/hide table
Illustration 9 | g00393012 |
- Remove exposed spacer (6) .
Show/hide table
Illustration 10 | g00393013 |
- Push accumulator valve (10) and bladder (11) into the shell.
Show/hide table
Illustration 11 | g00393014 |
- Remove ring (14), O-ring seal (7), and washer (8) .
Show/hide table
Illustration 12 | g00393018 |
- Fold rubber ring (9). Remove rubber ring (9) .
Show/hide table
Illustration 13 | g00393022 |
- Remove accumulator valve (10) and bladder (11) from the shell.
Show/hide table
Illustration 14 | g00393023 |
Show/hide table
Illustration 15 | g00393097 |
- Remove plug (19) and O-ring seal (20) .
Show/hide table
Illustration 16 | g00393098 |
- Remove nut (5). Nut (5) is externally located on the accumulator valve.
- Remove exposed spacer (6) .
- Remove ring (14), O-ring seal (7), and washer (8) .
- Fold rubber ring (9). Remove rubber ring (9) .
- Remove the valve assembly from the shell.
- Remove nut (18), piston (17), poppet (15), and spring (16) from plug (21) .
Caterpillar Information System:
572R Pipelayer Final Drive Oil Sample - Obtain
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Cooling System Level - Check
793B Off-Highway Truck Fire Prevention and Explosion Prevention
572R Pipelayer Cooling System Coolant (DEAC) - Change
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Troubleshooting - Steering
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System Relays
3176C and 3196 Industrial Engines Connecting Rod Bearing Journal
572R Pipelayer Cooling System Additive (DEAC) - Add
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Troubleshooting - Air Conditioning and Heating System
572R Pipelayer Circuit Breakers - Reset
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Troubleshooting - Implement Hydraulic System
3176C and 3196 Engines for Caterpillar Built Machines Main Bearing Journal
572R Pipelayer Engine Oil Sample - Obtain
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Information and Warning Lamps
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Master Cylinder
572R Pipelayer Hydraulic System Oil Sample - Obtain
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Before Starting Engine
3176C and 3196 Industrial Engines Piston and Rings
572R Pipelayer Transmission Oil Sample - Obtain
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System Elevated Shift Function
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System Lockup Clutch Function
3406E and 3456 Industrial Engines Jacket Water Heater
3176C and 3196 Engines for Caterpillar Built Machines Housing (Front)
CP-563C and CS-563C Vibratory Compactors Window Wiper - Inspect/Replace