Steering Pump and Mounting
Show/hide table
 | |
| Illustration 1 | g00570147 |
(1) Torque for the locknut ... 102 ± 14 N·m (75 ± 10 lb ft)
Note: Use the nut and the washer that is supplied with the pump.
(2) The pump and the drive gear have a tapered shaft. The parts should be assembled dry.
(3) Pressure setting for the relief valve ... 19000 ± 300 kPa (2760 ± 44 psi)
Caterpillar Information System:
572R Pipelayer Power Train Transmission Mounting
IT14G Integrated Toolcarrier Cab Air Filter - Clean/Replace
572R Pipelayer Power Train Drive Shaft
793B Off-Highway Truck Transmission Tank Suction Screen - Clean/Inspect/Replace
IT14G Integrated Toolcarrier Battery, Battery Cable or Battery Disconnect Switch - Replace
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Alternator and Regulator
572R Pipelayer Caterpillar Monitoring System
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Power Train Transmission
572R Pipelayer Ether Starting Aid - If Equipped
IT14G Integrated Toolcarrier Braking System - Test
IT14G Integrated Toolcarrier Brake Discs - Check
IT14G Integrated Toolcarrier Battery Electrolyte Level - Check
CP-563C and CS-563C Vibratory Compactors Axle Oil Sample - Obtain
IT14G Integrated Toolcarrier Cooling System Coolant (DEAC) - Change
572R Pipelayer Power Train Bevel and Transfer Gears
IT14G Integrated Toolcarrier Cooling System Coolant Additive (DEAC) - Add
CP-563C and CS-563C Vibratory Compactors Cooling System Pressure Cap - Clean/Replace
IT14G Integrated Toolcarrier Circuit Breakers and Fuses - Reset/Replace
3406E and 3456 Industrial Engines Vibration Damper
CP-563C and CS-563C Vibratory Compactors Cooling System Water Temperature Regulator - Replace
572R Pipelayer Gauges
3034 Engine for Caterpillar Built Machines Electric Starting Motor
IT14G Integrated Toolcarrier Cooling System Level - Check
789B Off-Highway Truck Power Train Torque Converter Lockup Clutch Supply Pressure - Test and Adjust