Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Caterpillar


Trailer Connector

Usage:

45 1DR
A SAE seven-pin connector is mounted next to the implement control valves at the rear of the machine. Use the seven-pin connector to power electrical systems on implements.


Illustration 1g00349352

Table 1
Trailer Connector    
Pin     Circuit     Wire    
1     Ground     RM4-White    
2     Left Parking Light     RM162-Black    
3     Left Turn Signal     RM131-Yellow    
4     Stop Light     RM55-Red    
5     Right Turn Signal     RM135-Green    
6     Right Parking Light     RM159-Brown    
7     Work Light     RM141-Blue    

When the implement's electrical system does not match the trailer connector, construct an adapter harness assembly. Use a 102-4090 Connector Plug to make the harness. A 102-4090 Connector Plug is available from any Caterpillar dealer.

See the implement's operator's manual for electrical requirements for the implement.

Caterpillar Information System:

3508 and 3516 EUI Engines and 5130 and 5230 Excavators Exhaust Manifold
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Shipping the Machine
M318 and M320 Excavators Cab Riser (Adjustable) Linkage - Lubricate - If Equipped
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Hood - Remove and Install
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Turbocharger
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Adjusting Implement Kick-out Pressure
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Service Brake Control
527 Track-Type Skidder Sampling Interval and Location of Sampling Valve
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Roading the Machine
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Starting Below 0°C (32°F)
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Starting Above 0°C (32°F)
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Seat Adjustment and Seat Belt Inspection
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Three-Point Hitch Controls
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Air Inlet and Exhaust Lines
CP-563C and CS-563C Vibratory Compactors Parking Brake Control
517 Track-Type Skidder Refill Capacities
3306C Engines for Caterpillar Built Machines Camshaft
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train Monitoring System (Power Train Functions)
CP-563C and CS-563C Vibratory Compactors Propel Control
CP-563C and CS-563C Vibratory Compactors Propel Speed Range Control
539 Knuckleboom Loader Stabilizer and Cylinder Bearings - Lubricate
539 Knuckleboom Loader Boom and Stick Linkage - Lubricate
517 Track-Type Skidder Engine Air Filter Primary Element - Clean/Replace
3306C Engines for Caterpillar Built Machines Camshaft Bearings
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.