527 Track-Type Skidder Caterpillar


Sampling Interval and Location of Sampling Valve

Usage:

527 2RS
Take the oil samples as close as possible to the standard intervals. You must establish a consistent trend of data in order to receive the full value from S·O·S oil analysis. In order to establish a pertinent history of data, perform consistent scheduled oil samplings that are evenly spaced.

Table 1
Recommended Intervals    
Compartment     Oil Change     Sampling
Interval    
Sampling
Valve    
Oil
Type    
Engine     250 Hours     250 Hours     No     DEO    
Transmission     1000 Hours     500 Hours     No     TDTO    
Hydraulics     1000 Hours     500 Hours     No     HYDO    
Final Drives     2000 Hours     500 Hours     No     TDTO    
Winch     1000 Hours     500 Hours     No     TDTO    

Caterpillar Information System:

Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Roading the Machine
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Starting Below 0°C (32°F)
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Starting Above 0°C (32°F)
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Seat Adjustment and Seat Belt Inspection
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors After Starting Engine
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Prestart Checks
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Walk-Around Inspection
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Starting with Jump Start Cables
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Output Status Mode
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Governor Control
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Refrigerant Condenser - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Braking System Service Brake Control
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Adjusting Implement Kick-out Pressure
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Turbocharger
D250E Series II and D300E Series II Articulated Trucks 3306B Engine Supplement Hood - Remove and Install
M318 and M320 Excavators Cab Riser (Adjustable) Linkage - Lubricate - If Equipped
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Shipping the Machine
3508 and 3516 EUI Engines and 5130 and 5230 Excavators Exhaust Manifold
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Trailer Connector
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Three-Point Hitch Controls
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Air Inlet and Exhaust Lines
CP-563C and CS-563C Vibratory Compactors Parking Brake Control
517 Track-Type Skidder Refill Capacities
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.