PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING THE (206-2710) ELECTRONIC CONTROL MODULE ON CERTAIN 3512B, 3512C, AND 3516B ENGINES
Usage:
REBE1717-00
Show/hide table
| 16Mar2007 |
B090
B190
D241
D350
D430
D490
E310
E459
E500
L044
L120
L403
M350
N020
N030
N140
B190
D241
D350
D430
D490
E310
E459
E500
L044
L120
L403
M350
N020
N030
N140
Show/hide table
| Before/After (Limited distribution) | PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REPLACING THE (206-2710) ELECTRONIC CONTROL MODULE ON CERTAIN 3512B, 3512C, AND 3516B ENGINES |
|
| 1901 | PS42363 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42363" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Mar2009 |
PROBLEM
Show/hide table
| The electronic control module (ECM) on certain 3500 Diesel Engines may experience an early hour failure. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 3512B | 2AF00604, 609-610 S2J00400-00406 S2K00260 S2L00602, 606-607 |
| 3512C | LLA00441-00442, 444-446 R1A00183-00184 |
| 3516B | PBR00273 S2X00587-00590 ZAP00540-00541, 550 ZAR00200-00201 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 2062710 | CONT GP-E |
ACTION REQUIRED
Show/hide table
| Connect ET to the engine ECM and look at the ECM serial number from the information screen. If the ECM serial number matches any of the following ECM serial numbers replace the ECM. The ECM Serial Numbers that may have the issue are: 28766058JP 28766059JP 31866011JP 33466265JP 33466269JP 33466289JP 33646280JP No other ECM's in the field are affected by this defect issue. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-12 mo |
||||||
Show/hide table
| NOTE: This is a 2.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| A Part Return request will be issued for these parts after the warranty cliam is filed. |
Show/hide table
| 1.) Supply power to the electronic control module (ECM) but do not start the engine. 2.) Connect Electronic Technician (ET) to the data link. 3.) Note the software part number in the ECM Summary Screen and the ECM serial number. 4.) If the ECM serial number does NOT match the seven serial numbers listed in this letter then no further action is required. If the ECM serial number DOES match the serial numbers listed then proceed to step 5. 5.) Use the ET Copy Configuration - ECM Replacement funtion to load the configuration from the ECM. Make note to save the configuration. Disconnect ET. 6.) Turn off the supply power to the ECM. 7.) Replace the ECM with the appropriate ECM service replacement. 8.) Turn on the supply power to the ECM, but do NOT start the engine. 9.) Connect ET to the data link. 10.) Flash the ECM with the appropriate flash file. 11.) Using the ET Copy Configuration - ECM Replacement function, load the saved configuration from the file where it was saved and program the ECM. 12.) Test the engine after Repair. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING EXISTING DIESEL PARTICULATE FILTERS (DPG'S) ON CERTAIN 285HP APPLICATIONS OF C-9 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING EXISTING DIESEL PARTICULATE FILTERS (DPG'S) ON CERTAIN 285HP APPLICATIONS OF C-9 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES IN ROCKDRILL APPLICATIONS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES IN ROCKDRILL APPLICATIONS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE FUEL FILTER ARRANGEMENT ON CERTAIN C6.6 ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE CONTROL SOFTWARE AND CALIBRATING THE ENGINE OIL LEVEL GAUGE ON CERTAIN C-13 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE ENGINE CONTROL SOFTWARE AND CALIBRATING THE ENGINE OIL LEVEL GAUGE ON CERTAIN C-13 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN C9 ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN C9 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING SOFTWARE FOR THE ELECTRONIC MODULAR CONTROL PANEL (EMCP) 3.2 AND EMCP 3.3 CONTROLS, PART NUMBERS 227-5801 AND 227-5802 ON CERTAIN 3500B, 3500C, 3406C, C-18, C32, C27, C15, C18, AND C9 GENERATORS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING SOFTWARE FOR THE ELECTRONIC MODULAR CONTROL PANEL (EMCP) 3.2 AND EMCP 3.3 CONTROLS, PART NUMBERS 227-5801 AND 227-5802 ON CERTAIN 3500B, 3500C, 3406C, C-18, C32, C27, C15, C18, AND C9 GENERATORS
PRODUCT IMPROVEMENT PROGRAM FOR CERTAIN C15 AND C18 GENERATOR UNITS BUILT IN GRIFFIN WITH OPTIONAL JACKET WATER HEATER (FEATURE CODE JWH0058). PRODUCT IMPROVEMENT PROGRAM FOR CERTAIN C15 AND C18 GENERATOR UNITS BUILT IN GRIFFIN WITH OPTIONAL JACKET WATER HEATER (FEATURE CODE JWH0058).
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN C9 ENGINES USED IN RECRATIONAL VEHICLES AND EMERGENCY RESPONSE VEHICLES. PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN C9 ENGINES USED IN RECRATIONAL VEHICLES AND EMERGENCY RESPONSE VEHICLES.
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE FOR THE VARIABLE VALVE ACTUATOR (VVA) ON CERTAIN C13 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE FOR THE VARIABLE VALVE ACTUATOR (VVA) ON CERTAIN C13 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GENERATOR ON CERTAIN 3456 60HZ GENERATOR SETS. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE GENERATOR ON CERTAIN 3456 60HZ GENERATOR SETS.
Turbocharger Exhaust Leaks on 3512B and 3516B Marine Engines Turbocharger Exhaust Leaks on 3512B and 3516B Marine Engines
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ENGINE ELECTRONIC CONTROL MODULES ON CERTAIN C7 HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ENGINE ELECTRONIC CONTROL MODULES ON CERTAIN C7 HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON SKIRTS ON CERTAIN C-12 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON SKIRTS ON CERTAIN C-12 TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN C13 AND C15 ON HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN C13 AND C15 ON HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR HAVING THE CUSTOMER INSTALL REGULATORY DECALS ON CERTAIN C-13 AND C-15 ON-HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR HAVING THE CUSTOMER INSTALL REGULATORY DECALS ON CERTAIN C-13 AND C-15 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING EXISTING CONTINUOUS REGENERATION TRAP DIAGNOSTIC MODULE (CRTDM) (J-M DPF MONITOR) ON CERTAIN APPLICATIONS OF 380HP C13 ENGINES IN MCI COACHES. PRODUCT SUPPORT PROGRAM FOR REPLACING EXISTING CONTINUOUS REGENERATION TRAP DIAGNOSTIC MODULE (CRTDM) (J-M DPF MONITOR) ON CERTAIN APPLICATIONS OF 380HP C13 ENGINES IN MCI COACHES.
PRODUCT SUPPORT PROGRAM FOR THE REPLACEMENT OF THE LOW PRESSURE ACTUATORS FOR THE INTAKE VALVE ON CERTAIN C11 AND C13 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR THE REPLACEMENT OF THE LOW PRESSURE ACTUATORS FOR THE INTAKE VALVE ON CERTAIN C11 AND C13 TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL FILTER BASE AND FUEL PRESSURE REGULATORS ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL FILTER BASE AND FUEL PRESSURE REGULATORS ON CERTAIN C13 AND C15 ON-HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3508 GENSET ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3508 GENSET ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR MODIFYING THE FILTER BYPASS ON CERTAIN TH31 and TH35 OEM PETROLEUM TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR MODIFYING THE FILTER BYPASS ON CERTAIN TH31 and TH35 OEM PETROLEUM TRANSMISSIONS
PRODUCT SUPPORT PROGRAM FOR TESTING COOLANT SAMPLE FOR PRESENCE OF DIESEL FUEL AND IF NECESSARY REPLACE THE CYLINDER HEAD FOR CERTAIN C27 AND C32 ENGINES. PRODUCT SUPPORT PROGRAM FOR TESTING COOLANT SAMPLE FOR PRESENCE OF DIESEL FUEL AND IF NECESSARY REPLACE THE CYLINDER HEAD FOR CERTAIN C27 AND C32 ENGINES.
PRODUCT SUPPORT PROGRAM FOR REFLASHING SOFTWARE ON C9 50 HZ 215 BKW MARINE GENSET ENGINES. PRODUCT SUPPORT PROGRAM FOR REFLASHING SOFTWARE ON C9 50 HZ 215 BKW MARINE GENSET ENGINES.