Neutral Start Control
The neutral start control ensures that the machine will start only in NEUTRAL. The Electronic Programmable Transmission Control (EPTC II) receives a signal from the shift lever switch. When the shift lever is in NEUTRAL, the signal is grounded and the machine will start. If the shift lever switch is not in NEUTRAL, the ground is broken and the machine will not start. This will prevent the machine from being started in a gear. The neutral start control is located in the shift lever console.
Caterpillar Information System:
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Solenoid Valve and Manifold (Ride Control, Head End) - Remove and Install
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Crankshaft Pulley
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Window Wiper and Wiper Motor
793C Off-Highway Truck Turn Signal and Warning Switch
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Power Train Frame
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Power Train Transmission Oil Filter
793C Off-Highway Truck Power Train Hoist Control Lever
793C Off-Highway Truck Air System and Brakes Hydraulic System Schematic
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Ride Control Accumulator - Remove and Install
3500B Engines for Caterpillar Built Power Modules Engine Oil Pump
793C Off-Highway Truck Power Train Transmission Gear Indicator
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Power Train Tension Cylinder
793B Off-Highway Truck Light Switches
938G Wheel Loader and IT38G Integrated Toolcarrier Braking System General Information
938G Wheel Loader and IT38G Integrated Toolcarrier Lift Kickout
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Solenoid Valve and Manifold (Ride Control, Rod End) - Remove and Install
793B Off-Highway Truck Power Train Solenoid Valve (Upshift and Downshift)
793C Off-Highway Truck Power Train Lockup Solenoid
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Seat - Remove and Install
3512 and 3516 EUI Engines and 784B, 785B, 789B and 793B Off-Highway Truck/Tractors Vibration Damper
938G Wheel Loader and IT38G Integrated Toolcarrier Drive Shaft Spline (Center) - Lubricate
793C Off-Highway Truck Window Wiper and Washer Control
793C Off-Highway Truck Brake Release Switch
793B Off-Highway Truck Automatic Electronic Traction Aid (AETA)