Hoist Control Lever
Show/hide table
 | |
| Illustration 1 | g00277572 |
Hoist Lever | |
The hoist lever is connected to the lever position sensor.
The lever position sensor inputs information to the Electronic Programmable Transmission Control (EPTC II). The EPTC II will allow only a forward speed position or the NEUTRAL position while the body is raised. After the lever position sensor indicates that the body is not raised, the shift lever must be put into the NEUTRAL position before the lever can be shifted into the REVERSE position.
Caterpillar Information System:
793C Off-Highway Truck Air System and Brakes Hydraulic System Schematic
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Ride Control Accumulator - Remove and Install
3500B Engines for Caterpillar Built Power Modules Engine Oil Pump
793C Off-Highway Truck Power Train Transmission Gear Indicator
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Power Train Tension Cylinder
938G Wheel Loader and IT38G Integrated Toolcarrier Braking System Service Brake Oil Pressure Switch
938G Wheel Loader and IT38G Integrated Toolcarrier Steering System General Information
793B Off-Highway Truck Power Train Oil Filter (Transmission Lubrication)
793B Off-Highway Truck Air System and Brakes Air Compressor Governor
793B Off-Highway Truck Power Train Oil Filter (Transmission Charging)
793C Off-Highway Truck Air System and Brakes Air Compressor
3500B Engines Engine Trunnion
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Power Train Transmission Oil Filter
Challenger 65E, Challenger 75E, Challenger 85E and Challenger 95E Agricultural Tractors Power Train Frame
793C Off-Highway Truck Turn Signal and Warning Switch
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Window Wiper and Wiper Motor
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Crankshaft Pulley
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Solenoid Valve and Manifold (Ride Control, Head End) - Remove and Install
793C Off-Highway Truck Power Train Neutral Start Control
793B Off-Highway Truck Light Switches
938G Wheel Loader and IT38G Integrated Toolcarrier Braking System General Information
938G Wheel Loader and IT38G Integrated Toolcarrier Lift Kickout
938G Wheel Loader and IT38G Integrated Toolcarrier Machine Systems Solenoid Valve and Manifold (Ride Control, Rod End) - Remove and Install
793B Off-Highway Truck Power Train Solenoid Valve (Upshift and Downshift)