1999/06/28 Caterpillar


New Inlet Adapter Available For Water Pump Group {1364}

Usage:


D400D (8TF),
D350E (9LR),
D400E (2YR) Articulated Truck

SUPPLEMENT: OCTOBER 4, 1999

Service Magazine SEPD0491, Article 12, Page 12, June 28th, 1999; "New Inlet Adapter Available For Water Pump Group".

The former Inlet Adapter in the reference article has an incorrect part number. The correct part number is shown in Service Magazine SEPD0491, Article 15, Page 17 titled "New Inlet Adapter Available For Water Pump Group - Correction."

--------------- END SUPPLEMENT ---------------

Description of Change: Changes have been made to the Water Pump Group used on the D400D, D350E and D400E Articulated Trucks. A new 4P-2383 Inlet Adapter has replaced the former 7C-0222 Inlet Adapter. The 4P-2383 Inlet Adapter is made from cast iron which has a better resistance to corrosion than cast aluminum. The 7C-0222 Inlet Adapter was manufactured from cast aluminum.

Adaptable To: The 4P-2383 Inlet Adapter is effective from 9LR00723 and 2YR01239. The 4P-2383 Inlet Adapter is adaptable to the first production of the machines listed above.


Illustration 1.
Position of the Inlet Adapter

Caterpillar Information System:

1999/06/28 New Swing Control Valve Prevents Swing Drift {5454,5480}
1999/06/28 A Special Instruction For Installing Ride Control Kits Is now Available {5004}
1999/06/28 Assembling The Transmission Thrust Bearings For Backhoe Loaders {3030}
1999/06/28 Splined Pins For Backhoe Loaders {6506,6502}
1999/06/28 New Pressure Switch Assembly For Engine Oil Improves Reliability {7455,1318}
1999/06/28 Installation Of Hydraulic Motor Case Drain Line {6129,5057,5051}
1999/06/28 Tension Cylinder Pin Now Includes Spacers {4197}
1999/06/28 Fender Mud Flaps Available {7252,4220}
1999/06/21 Methods Of Providing Feedback On Diagnostic Information {7569}
1999/06/21 Be Sure The Cylinder Head Bore For The Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/06/21 Drain Water And Sediment From The Fuel Tank Daily {1273}
1999/06/21 Proper Usage For The Steer Assist Switch {4129,1400}
1999/06/28 Actuator For Transmission Switch Can Be Service Replaced {7332}
1999/06/28 New VIMS Service Manual Available {7601}
1999/06/28 Dimensions For Articulated Hitches, Lift Arms, Front And Rear Levers, And Oscillating Rear Axle Assemblies Are Now Available In An Updated Special Instruction {3260,3268,6116,6118,6119,6125,6126,6127,7057,7069,7100}
1999/06/28 Hydraulic S·O·S Port Relocated {7542}
1999/06/28 Remote Forward-Neutral-Reverse Transmission Control Option Eases Operation {5705,3065}
1999/06/28 Improved Fenders Increase Service Life {7252}
1999/06/28 Revised CD-ROM For Hydraulic Electronic Unit Injector (HEUI) Fuel System Available {0350}
1999/06/28 Special Instruction, REHS0494, "Accessing Flash Software For Machines", Is Now Available {7620}
1999/07/05 Improved Drawbar/Three-Point Hitch Increases Durability {7120}
1999/07/05 New Lifting Capacity Warning Film Now Available {7405}
1999/07/05 Improved Sun Gear Available For Off-Highway Trucks And Tractors {4050,4055}
1999/07/05 New Clutch Discs With Improved Core Material Now Available For Large Off-Highway Trucks {3187,3030}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.