Usage:
416C (1WR, 1XR, 4ZN, 5YN),
426C (1CR, 1ER, 1MR, 1NR, 1YR, 1ZR, 6XN, 7WN),
428C (2CR, 8RN),
436C (1FR, 1GR, 1PR, 1RR, 2AR, 2BR, 8TN, 9JN),
438C (1JR, 1TR, 2DR, 9KN) Backhoe Loaders
Reference: SENR1206 Disassembly & Assembly, 416C, 426C, 428C, 436C, and 438C Backhoe Loaders Power Train, "Disassemble & Assemble Drive Shaft", this module is part of the SENR1200 Service Manual.
The thrust bearings listed in the part manuals for backhoe loaders have been replaced. See the appropriate chart of replacement bearings for each transmission used in backhoe loaders.
Illustration 1.
Mount the Radial Bearing (1) to Side (B) of the Thrust Bearing (2). Place the Groove (C) of the Thrust Bearing (2) away from the Radial Bearing (1).
During reassembly of any C Series Transmission, always place the radial bearing (1) to Side B of the thrust bearing (2). Groove (C) on the thrust bearing (2) faces away from the radial bearing (1). See Illustration 1. Detail A shows the cross-sectional view of the two bearings.
Install the 123-8913 Radial Bearing (1) to Side B of the 172-5317 Thrust Bearing (2).
Install the 150-3757 Radial Bearing (1) to Side B of the 172-6743 Thrust Bearing (2).
Install the 123-8912 Radial Bearing (1) to Side B of the 172-6050 Thrust Bearing (2).