1997/10/27 Caterpillar


Corrected Boom Chain Information For Operation And Maintenance Manual{6460,6404}

Usage:


TH103 (3PN) Telehandlers

Reference: Service Manual SENR1230, Operation and Maintenance Manual SEBU7017, "Maintenance Section," "Every 250 Service Hours," "Chain Adjustment," Page 102. This correction is for all language versions of this manual.

This article describes the correct procedures for Step 6 and Step 7.

Step 6 should read, "Remove lock nut (5) and tighten the retraction chain adjusting nut (6) to a torque of 92 N·m (67.6 lb ft). Install and tighten the lock nut."

Step 7 should read, "Tighten the extension chain adjusting bolt (4) to a torque of 138 N·m (101.5 lb ft). Tighten locking bolt (3) and lock nut (2)."

Caterpillar Information System:

1997/10/27 Updated VIMS Configurations Available For 793C Off-Highway Trucks{7601,7407,7417,7470,1924}
1997/10/27 New Brake Valve Groups Have Breather Plug In Vent Port For Air Cylinder Group{4265}
1997/10/27 Changes Made To Water Lines Group In Order To Reduce Damage Caused By Vibration{1380}
1997/10/27 New Custom Product Support Literature Is Available For 776C Tractors And 777C Trucks Equipped With Fuel Tank Extension Group{0374}
1997/10/27 New Custom Product Support Literature Is Available For 777B Trucks Equipped With Air Quick Disconnect{0374}
1997/10/27 New Custom Product Support Literature Is Available For 773D And 775D Trucks Equipped With Wiggins Service Center{0374}
1997/10/27 Improved Duo-Cone Seal Group Increases Service Life{4201,4050}
1997/10/27 Reliability Of Transmission Fluid Level Reading Improved With Addition Of Baffle Plate{3081,3080}
1997/10/27 All "H" Series Motor Graders (Except 24H) Are Now Equipped With 2 Cylinder Air Compressors{1803}
1997/10/27 Stronger Sun Visor Guides Available {7300,7340}
1997/10/27 Improved Steering Column Boot Resists Cracking{4338,7300}
1997/10/20 Service Interval Change For Extended Life Coolant Extender And Extended Life Coolant{1395,7543,7545}
1997/10/27 New Vane Pump Group, Assures Clearance For Drive Gear, And Correct Alignment Of Vane Pump Group With Torque Converter Cover{5055}
1997/10/27 New Troubleshooting Guide Available{0374}
1997/10/27 Significant Improvement For Pump Impellers (Water Pumps){1364}
1997/10/27 History Of Pump Impeller (Water Pump) Changes{1364}
1997/11/03 New Tie Rods And Spindle Assemblies Improve Service Life {4329,3282}
1997/11/03 Serviceable Parts Available For Low Pressure Turbocharger In Low Altitude Engine Arrangement {1052}
1997/11/03 Parts For Engine Prelube Motor Now Serviced {1603}
1997/11/03 Improved Seal In Torque Converter Group Available {7555,3101}
1997/11/03 New Radiator Bracket Increases Service Life {1353}
1997/11/03 VIMS-PC, Windows '95 And Novell Network Interaction {7601}
1997/11/03 Proper Welding Procedure On Machines And Engines With Electronic Controls {1400}
1997/11/10 Proper Tensioning Of V-Belt {1807,7320,1800,1357}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.