1997/09/15 Caterpillar


New Rear Axle Differential Group Bevel Gear Set Improves Service Life {3258,3013,3256,3278}

Usage:


TH62 (3LN1-652, 4TM1-845) Telehandlers


Illustration 1.

In Parts Manual SEBP2352-00, Telehandlers, 127-0455 Differential Group, a new bevel gear set is available for the rear axle of TH62 (3LN1-652, 4TM1-845) the number for the new bevel gear set is 146-4090 Bevel Gear Set (10)

NOTE: Serial numbers TH62 (3LN653-Up, 4TM846-UP) use 8I-4299 Bevel Gear Set.

NOTE: The 146-4090 Bevel Gear Set has 8 teeth on the pinion, and the bevel gear has 41 teeth. The former 137-2542 Bevel Gear Set has 7 teeth on the pinion and 36 teeth on the bevel gear. The ratio remains the same.

Caterpillar Information System:

1997/09/15 Proper TH Series Transmission Clutch And Solenoid Operation {3150,3073,3155,3167}
1997/09/15 New Rear Suspension Cylinders Improve Service Life {7213,7201}
1997/09/15 New Hoist Cylinder Seals And End Cap Now Available For Service Repair {5102}
1997/09/15 New Seal Used In Transmission Transfer Gear Group For Improved Seal Life {3159,3002}
1997/09/15 Hose Assembly And New Hardware Replaces Tube Assembly, Improving Fuel Priming Pump Life {1274}
1997/09/15 Transmission Shift Control Group Improved For Reliability And Longer Service Life {3168}
1997/09/15 Heavy Duty Debris Guards Available {4150,4187,4177}
1997/09/15 Service Magazine Special Edition, SEPD0376, Available {0374}
1997/09/08 3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/08 New Engine Starting Motor Available{1453}
1997/09/08 New Steel Bearings Available For Front Cylinder Mounts{7551,7201}
1997/09/08 New Handrails Improves Service Life{7256}
1997/09/15 New Front Axle Bevel Gear Set Improves Service Life {3258,3013,3256,3278}
1997/09/15 Correction To Fan Speed And Pressure Test Procedure {1356,1386,1387}
1997/09/15 New Temperature Regulators Provide More Accurate Opening And Closing Temperatures {1330,1355}
1997/09/15 Cold Cylinder Cutout Strategy Added To The Electronic Control Module (ECM) Software {1902}
1997/09/22 Non-Rotating Drawbar Pin Extends Service Life{7105,7119}
1997/09/22 Charcoal Air Filter Available Reduces Odors From Outside Air{7309,7320,7342}
1997/09/22 Engine Oil Filter Access Changed For Improved Serviceability And Turbo Life{1306}
1997/09/22 Four Wheel Drive All-Wheel-Steer Brakes{4250,4257}
1997/09/22 New Differential Pinion Bearing Setting Tool And Procedure Available{3258}
1997/09/22 Retrofit Kits Available For Rear Axle Lube And Filtration{4051,3258,3260,7601}
1997/09/22 Improved Braze Joint On Brake Oil Coolers Reduce Possibility Of Leaks{1365}
1997/09/22 Additional Relay Valve Used In Automatic Retarder Arrangements To Improve Automatic Retarder Control (ARC) System Reliability{4005,4133,3120}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.