1997/02/17 Caterpillar


Rings Can Be Installed In The Rear Suspension Group To Improve Bushing Service Life {7217}

Usage:


D250E (5TN),
D300E (7FN) Articulated Trucks

Description of Change: The rear suspension group has been changed to improve the service life of the 7U-7292 Bushings. The change was made to the spindle and end cap to give more contact area on the bushings. This new spindle and 133-6941 Cap (end cap) change was in effect with D250E (5TN494) and D300E (7FN312) Articulated Trucks.

Adaptable To: For earlier machines, 133-5865 Rings are available that go between the inner bushing and spindle and the outer bushing and original end cap. The 133-5865 Rings will increase the service life of bushings on machines in the field.

NOTE: The 133-5865 Rings and 133-6941 Cap were in effect with D300E (7FN1) Articulated Trucks.


Location of Components (1) 133-5865 Rings. (2) Spindle. (3) Original end cap. (4) Bushings.

Caterpillar Information System:

1997/02/17 Guards Fitted To The Drive Axle Groups To Protect The Hydraulic Brake Fittings From Rock Damage {4257,3278}
1997/02/17 Service Parts Available For Tube Kit For Hydraulic Pump Group {5070}
1997/02/17 New Plug-Orifice Increases Oil Flow In Bucket Control Valve Group {5122}
1997/02/10 Improved Spacer Plate Assembly Procedure For Telehandler Transmissions {3030,7551}
1997/02/10 Correct Procedure To Adjust Rear Axle Brake Actuators {4267,4004}
1997/02/10 Muffler Bracket Improved And Engine Ground Cables Changed {1062,1408}
1997/02/10 Service Parts Now Available For Brake Valve Group {4250}
1997/02/10 Procedure For Checking Inter Axle Differential Operation {3264}
1997/02/10 Special Instruction SEHS9836 Available For Retrofitting A 785B Off-Highway Truck With Vital Information Management System (VIMS) {7601,7490,0757,1408,7494,4294}
1997/02/10 Additional Bracket Assemblies Added To Muffler Group to Improve Muffler Mounting {1062}
1997/02/10 New Circle Segments Improve Retention {6152}
1997/02/10 Drive Chain Master Link Roll Pin Is Now Serviced {3261}
1997/02/17 Fuel Gauges Now Available {7450,7481,7483,1273}
1997/02/17 Wiring Harness Modification Improves Service Life Of The Cab Wiring Group {1435,1400,1408}
1997/02/17 New Flow Control Valve For Water Spray System Available {5614,5137}
1997/02/17 Improved Speed Sensor Group Used {1907}
1997/02/17 VIMS-PC Version 2.1 Now Available {7601}
1997/02/24 New Tube Assembly And Associated Hardware In The Engine Turbocharger Oil Lines Group {1307}
1997/02/24 New Tooling Simplifies Steering Pump Neutral Adjustment {5070,0738}
1997/02/24 Some Service Parts Available For Engine Fuel Injection Pump {1251}
1997/02/24 New Water Temperature Regulator Improves Cab Heating In Cold Weather Conditions {1350,1355}
1997/02/24 New Hydraulic Oil Temperature Sender And Hydraulic Oil Temperature Gauge More Responsive {7450,7488}
1997/02/24 Special Instructions Now Available For 793C Off-Highway Truck Assembly Procedure {0374}
1997/02/24 New ECM Controlled Variable Speed Fan Clutch Group Available {1356}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.