Usage:
(1) 5M-9548 Spring:
Length under test force ... 21.3 mm (.84 in)
Test force ... 4.5 ± 0.4 N (1.00 ± .08 lb)
Free length after test ... 34.0 mm (1.34 in)
Outside diameter ... 12.2 mm (.48 in)
(2) 4M-2381 Spring:
Quantity ... 2
Length under test force ... 12.2 mm (.48 in)
Test force ... 2.30 ± 0.18 N (.517 ± .041 lb)
Free length after test ... 22.6 mm (.89 in)
Outside diameter ... 7.62 mm (.300 in)
(3) 6T-3177 Spring:
Length under test force ... 32.3 mm (1.27 in)
Test force ... 89 ± 4 N (20 ± 1 lb)
Free length after test ... 44.5 mm (1.75 in)
Outside diameter ... 21.04 mm (.828 in)
(4) 5M-3492 Spacer thickness ... 0.25 mm (.010 in)
One spacer will change pressure ... 17 kPa (2.5 psi)
7M-1397 Spacer thickness ... 0.91 mm (.036 in)
One spacer will change pressure ... 60 kPa (9 psi)
(5) 8M-6402 Spring:
Color code ... red stripe
Length under test force ... 85.9 mm (3.38 in)
Test force ... 841 ± 67 N (189 ± 15 lb)
Free length after test ... 110.5 mm (4.35 in)
Outside diameter ... 19.8 mm (.78 in)
(6) 5M-9622 Spacer thickness ... 1.57 mm (.062 in)
One spacer will change pressure ... 195 kPa (28 psi)
5M-9623 Spacer thickness ... 0.91 mm (.036 in)
One spacer will change pressure ... 114 kPa (16.5 psi)
5M-9624 Spacer thickness ... 0.25 mm (.010 in)
One spacer will change pressure ... 31 kPa (4.5 psi)
(7) Torque for screen filter ... 6.1 ± 0.7 N·m (54 ± 5 lb in)
(8) 6T-5409 Spring:
Length under test force ... 72.2 mm (2.84 in)
Test force ... 1034 N (232 lb)
Free length after test ... 86.8 mm (3.41 in)
Outside diameter ... 21.3 mm (.84 in)
(9) 3T-9920 Spring:
Length under test force ... 38.6 mm (1.52 in)
Test force ... 307 ± 25 N (69.0 ± 5.6 lb)
Free length after test ... 52.32 mm (2.060 in)
Outside diameter ... 20.95 mm (.825 in)
(10) Tighten to a torque of ... 41 ± 7 N·m (30 ± 5 lb ft)
(11) Depth to install pin ... 2.5 ± 0.5 mm (.10 ± .02 in)
(14) Do not put sealant on the threads of the plugs (3 places).
(18) Depth to install dowel ... 4.0 mm (.16 in)
(19) Torque for two bolts ... 30 ± 7 N·m (22 ± 5 lb ft)
(20) Torque for one bolt ... 30 ± 7 N·m (22 ± 5 lb ft)
(21) Torque for one bolt ... 30 ± 7 N·m (22 ± 5 lb ft)
(22) Orientation of slot in the inner pins must be 90 ± 20° from the slot in the outer pin.
(23) Torque for one bolt ... 30 ± 7 N·m (22 ± 5 lb ft)
Adjustment Procedure For Detent Springs On Rotary Selector Spool
1. Make sure that bolts (17) in support assembly (12) are tightened to ... 30 ± 7 N·m (22 ± 5 lb ft)
2. Make sure that spring assemblies (13) are assembled to the correct dimension (A) of ... 4.5 ± 0.5 mm (.18 ± .02 in)
3. Tighten two bolts (16) to ... 30 ± 7 N·m (22 ± 5 lb ft)
4. Loosen bolts (17) and put the rollers of spring assemblies (12) in the correct location (centered) on cam (15).
5. Tighten bolts (17) to ... 30 ± 7 N·m (22 ± 5 lb ft)