Usage:
(1) Torque for 12 long studs (marked with an "X") ... 350 ± 40 N·m (260 ± 30 lb ft)
(2) Put 2P2506 Thread Lubricant on face of washers and threads of nuts. Tighten the nuts to a torque of ... 715 ± 25 N·m (525 ± 20 lb ft)
(3) Torque for six short studs ... 350 ± 40 N·m (260 ± 30 lb ft)
(4) Put lubricant on seal.
(5) These surfaces must be clean and free of oil and grease before wheel assembly is installed.
(6) Torque for 23 studs ... 150 ± 20 N·m (110 ± 15 lb ft)
(7) Put lubricant on seal.
(8) Torque for eight bolts ... 250 ± 14 N·m (185 ± 10 lb ft)
(9) Torque for nuts ... 1205 ± 55 N·m (890 ± 40 lb ft)
NOTE: Put 2P2506 Thread Lubricant on faces of washers and threads of nuts before assembly. If 2P2506 Thread Lubricant is not available, do not use any other type of lubricant. Clean the studs, bolts, nuts and washers with a solvent. Make sure each item is dry, and then tighten the nuts to ... 1825 ± 55 N·m (1340 ± 40 lb ft)