PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING FAN MOUNTING BOLTS ON CERTAIN G3304 AND G3306 ENGINES WITH RADIATOR AND FAN GROUP
Usage:
SEBE9874-00
Show/hide table
| 24Apr2006 |
U-507
A-502
D-505
O-505
TA-500
Show/hide table
| Safety | PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING FAN MOUNTING BOLTS ON CERTAIN G3304 AND G3306 ENGINES WITH RADIATOR AND FAN GROUP |
|
| 1356 | PI10503 |
|
Show/hide table
| NOTE: | This Program must be administered as soon as possible.
When reporting the repair, use "PI10503" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim
Description Code and "T" as the SIMS Description Code.
|
Show/hide table
Show/hide table
Show/hide table
PROBLEM
Show/hide table
| The fan mounting bolts may not have been torqued to the proper specifications during assembly at the factory on certain G3304 and G3306 engines and need to have the torque verified. The existing bolts can back out causing the fan to become loose and could result in unconfined debris with the potential for personal injury or death. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| G3304 | N4F01284, 1294, 1304, 1306-1308, 1311, 1313-1314, 1326-1327, 1332-1333, 1344, 1353, 1368, 1370, 1376, 1378, 1380, 1384, 1386, 1390, 1393, 1397, 1403, 1408, 1411, 1415, 1420, 1426, 1432, 1436, 1449, 1455, 1476, 1483, 1486, 1488, 1491, 1494-1495, 1499, 1502-1503, 1506, 1509, 1539, 1543, 1547, 1550, 1553, 1556, 1563, 1565, 1568, 1587-1588, 1593-1594, 1715, 1719, 1726, 1733, 1736, 1740-1741, 1746-1747, 1757, 1800, 1810, 1813-1814, 1817-1820, 1823, 1855, 1863, 1867, 1875-1876, 1883, 1889, 1893-1894, 1899, 1901-1902, 1920, 1926-1929, 1935-1939, 1945, 1951-1954, 1987-1988, 2001, 2010-2011, 2019, 2023, 2034-2035, 2039-2040, 2043, 2046-2047, 2054, 2059, 2068-2070, 2074 |
| G3306 | G6X01200, 1207-1208, 1210, 1220, 1225, 1265, 1281, 1309, 1314, 1354, 1359, 1362, 1369, 1389, 1415, 1431, 1445, 1449, 1452, 1460, 1464, 1514, 1550, 1556, 1583, 1592, 1605, 1610-1611, 1617, 1623, 1627-1628, 1631, 1635, 1641, 1653, 1657-1659, 1671-1672, 1676, 1709, 1715, 1721, 1727, 1733, 1739, 1818, 1853, 1965-1967, 1969, 1995-1997, 2007, 2011-2013, 2018-2019, 2034-2035, 2042, 2045-2046, 2054, 2061, 2073-2075, 2085, 2087, 2090, 2092-2093, 2095, 2118, 2121-2123, 2129, 2139, 2145-2149, 2154, 2160, 2166-2167, 2172-2174, 2178, 2187-2189 |
PARTS NEEDED
Show/hide table
| No parts needed for this program |
ACTION REQUIRED
Show/hide table
| 1. Remove the fan guard to gain access to the fan mounting bolts. 2. Tighten 6 - 5/16 inch bolts to 25 +/- 6 Nm torque. 3. Reinstall the fan guard. |
Show/hide table
OWNER NOTIFICATION
Show/hide table
| U.S. and Canadian owners will receive the attached Owner Notification. |
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
| NOTE: This is a 1.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
| MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE. |
Show/hide table
| COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 SAFETY - Product Improvement Program for tightening fan mounting bolts on certain engines with radiator and fan group. MODELS INVOLVED - G3304 (N4F), G3306 (G6X) Dear Caterpillar Product Owner: The fan mounting bolts may not have been torqued to the proper specifications during assembly at the factory on certain G3304 and G3306 engines and need to have the torque verified. The existing bolts can back out causing the fan to become loose and could result in unconfined debris with the potential for personal injury or death. You will not be charged for the service performed. Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated 24Apr2006 when scheduling this service. We regret the inconvenience this may cause you, but urge you to have this service performed for your added safety and satisfaction. Caterpillar Inc. Identification #(s) Attached to 24Apr2006 Service Letter |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR SEALING FUEL MANIFOLD LEAKS ON CERTAIN 3516B HD LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR SEALING FUEL MANIFOLD LEAKS ON CERTAIN 3516B HD LOCOMOTIVE ENGINES
Product support program for replacing exhaust bellows and installing inner heat shields on certain 3500B Marine Propulsion and Marine Auxiliary engines Product support program for replacing exhaust bellows and installing inner heat shields on certain 3500B Marine Propulsion and Marine Auxiliary engines
PRODUCT IMPROVEMENT PROGRAM TO REPLACE ENGINE CONTROL SOFTWARE ON CERTAIN C11, C13, AND C15 ON-HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM TO REPLACE ENGINE CONTROL SOFTWARE ON CERTAIN C11, C13, AND C15 ON-HIGHWAY TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMAN 3600 INJECTORS FROM DEALERS PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMAN 3600 INJECTORS FROM DEALERS PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR ADDING A DIODE INLINE TO THE WIRING HARNESS FOR THE AIR SHUTOFF ON CERTAIN 3508B AND 3512B ENGINES PRODUCT SUPPORT PROGRAM FOR ADDING A DIODE INLINE TO THE WIRING HARNESS FOR THE AIR SHUTOFF ON CERTAIN 3508B AND 3512B ENGINES
Product Improvement Program for adding the ECM reset timer relay scheme on certain 3456 Common Design Generator Sets Product Improvement Program for adding the ECM reset timer relay scheme on certain 3456 Common Design Generator Sets
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING CRANKSHAFTS ON CERTAIN C32 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING CRANKSHAFTS ON CERTAIN C32 MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C ENGINES INSTALLED IN CERTAIN ASV RC85 AND RC100 MACHINES PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C ENGINES INSTALLED IN CERTAIN ASV RC85 AND RC100 MACHINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE PLANETARY ON CERTAIN TH48FT-E80 OIL FIELD TRANSMISSIONS PRODUCT SUPPORT PROGRAM FOR UPDATING THE PLANETARY ON CERTAIN TH48FT-E80 OIL FIELD TRANSMISSIONS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE FILES ON CERTAIN UPS120, UPS150, UPS250I, UPS300, UPS300E, UPS301, UPS500, UPS600, UPS750, AND UPS900 UNINTERRUPTIBLE POWER SUPPLIES PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE FILES ON CERTAIN UPS120, UPS150, UPS250I, UPS300, UPS300E, UPS301, UPS500, UPS600, UPS750, AND UPS900 UNINTERRUPTIBLE POWER SUPPLIES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW WIRING HARNESS AND SOFTWARE ON CERTAIN TH48FT-E80 OIL FIELD TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW WIRING HARNESS AND SOFTWARE ON CERTAIN TH48FT-E80 OIL FIELD TRANSMISSIONS
Product Support Program for replacing Charge Air Pipes (149-1986 & 149-1987)on 3516B HD Vossloh Locomotive Engines. Product Support Program for replacing Charge Air Pipes (149-1986 & 149-1987)on 3516B HD Vossloh Locomotive Engines.
PRODUCT SUPPORT PROGRAM FOR INSTALLING VALIDATION AUXILIARY PUMPS ON CERTAIN 3500 ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING VALIDATION AUXILIARY PUMPS ON CERTAIN 3500 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE VARIABLE VALVE ACTUATION OIL PRESSURE SENSOR ON CERTAIN C15 ACERT HIGHWAY TRUCKS ENGINES. PRODUCT SUPPORT PROGRAM FOR REPLACING THE VARIABLE VALVE ACTUATION OIL PRESSURE SENSOR ON CERTAIN C15 ACERT HIGHWAY TRUCKS ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINES ON CERTAIN C32 PETROLEUM AND EPG ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LOW PRESSURE FUEL LINES ON CERTAIN C32 PETROLEUM AND EPG ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SCAC WATER TEMPERATURE REGULATOR ON CERTAIN PETROLEUM 3512C ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SCAC WATER TEMPERATURE REGULATOR ON CERTAIN PETROLEUM 3512C ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR ADDING A BRACKET TO THE ALTERNATOR GROUP ON CERTAIN C18 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR ADDING A BRACKET TO THE ALTERNATOR GROUP ON CERTAIN C18 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE TORSIONAL VIBRATION DAMPER ASSEMBLY AND FRONT GEAR TRAINS ON CERTAIN C32 ACERT MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE TORSIONAL VIBRATION DAMPER ASSEMBLY AND FRONT GEAR TRAINS ON CERTAIN C32 ACERT MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE FUEL COOLER ON CERTAIN C15 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE FUEL COOLER ON CERTAIN C15 MARINE ENGINES
Product Supprot Program for Installation of an inner shield to the exhaust manifold for certain 3500B Engines Product Supprot Program for Installation of an inner shield to the exhaust manifold for certain 3500B Engines
PRODUCT SUPPORT PROGRAM FOR FLASHING SOFTWARE FOR CERTAIN C11 AND C13 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR FLASHING SOFTWARE FOR CERTAIN C11 AND C13 TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING PERFORMANCE IMPROVMENT SOFTWARE FOR CERTAIN 3516B GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING PERFORMANCE IMPROVMENT SOFTWARE FOR CERTAIN 3516B GENERATOR SETS
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock