Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock Caterpillar


Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock

Usage:

@media screen { div.divFooter { display: none; } } @media print { div.divFooter { position: fixed; bottom: 0; right: 0; } }
Caterpillar: Confidential Yellow

NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

NOTE: This Revised Service Letter replaces the November 15, 1995 Service Letter. Changes have been made to the Service Claim Allowances.

Termination Date

February 29, 1996

Problem

The inside diameter is too small on certain 1260739 Liners and they need to be removed from Parts Stock.

Action Required

Remove all 1260739 Liners from Parts Stock with date codes 190595 through 280695.

NOTE: The date code can be located on label located on the packaged part. The date is printed as DDMMYY.

Service Claim Allowances

Submit one claim for all 1260739 Liners removed from Parts Stock.

NOTE: US and Canadian Dealers Only - When submitting a Parts Stock claim use 99Z00007 in the Product Identification Number Field.

Parts Disposition

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Caterpillar Information System:

The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines The Electronic Ignition System (EIS) Control Module Needs To Be Replaced On Certain G3508, G3512, And G3516 Engines
Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines Product Support Program For Installing A Standpipe In The Water Pump Of Certain 3406B, 3406C And 3406E Truck Engines
Service Letter Cancellation Service Letter Cancellation
Product Support Program For Installing A Washer Under The Speed/Timing Sensor On Certain 3406E Truck Engines Product Support Program For Installing A Washer Under The Speed/Timing Sensor On Certain 3406E Truck Engines
The Electronic Control Module (ECM) Needs To Be Replaced On Certain 3408C And 3412C Engines The Electronic Control Module (ECM) Needs To Be Replaced On Certain 3408C And 3412C Engines
Product Support Program For Updating Certain 3126 Marine Engines Product Support Program For Updating Certain 3126 Marine Engines
Certain 1R0749 Fuel Filter Assemblies Need To Be Removed From Parts Stock Certain 1R0749 Fuel Filter Assemblies Need To Be Removed From Parts Stock
Product Support Program For Increasing The Top Engine Limit Up To 2120 RPM And Installing A Viscous Damper On Certain 435 HP Rated 3406E Truck Engines Product Support Program For Increasing The Top Engine Limit Up To 2120 RPM And Installing A Viscous Damper On Certain 435 HP Rated 3406E Truck Engines
Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock Remove All 8T1485 Bolts Used On 3176B Engine Cylinder Heads From Parts Stock
1025831, 1242720 And 1161093 Water Pump Elbows Used On 3176B Truck Engines Need To Be Removed From Parts Stock 1025831, 1242720 And 1161093 Water Pump Elbows Used On 3176B Truck Engines Need To Be Removed From Parts Stock
The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines The Cylinder Head Lifting Bracket Tool Needs To Be Replaced For All 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing Injector Nozzles To Reduce White Smoke At Start Up On Certain 3406C Truck Engines Product Support Program For Replacing Injector Nozzles To Reduce White Smoke At Start Up On Certain 3406C Truck Engines
Product Support Program For Low Power Complaints On Certain 3406C Engines (425 HP With Brakesaver) Product Support Program For Low Power Complaints On Certain 3406C Engines (425 HP With Brakesaver)
Product Improvement Program For Marine Transmission Failures In Certain Grand Banks And Eastbay Boats Product Improvement Program For Marine Transmission Failures In Certain Grand Banks And Eastbay Boats
Product Support Program For Replacing The Fan Pulley And Adjusting FLS/FTS On Certain 3126 HEUI Engines Product Support Program For Replacing The Fan Pulley And Adjusting FLS/FTS On Certain 3126 HEUI Engines
Product Support Program For Overhauling 3176 Truck Engine Product Support Program For Overhauling 3176 Truck Engine
Product Support Program For Replacing The Hydraulic Jumper Tubes And Injectors On Certain HEUI Truck Engines Product Support Program For Replacing The Hydraulic Jumper Tubes And Injectors On Certain HEUI Truck Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Certain OR8266 Remanufactured Camshaft Kits For Use In D353 And G353 Engines Need To Be Removed From Parts Stock Certain OR8266 Remanufactured Camshaft Kits For Use In D353 And G353 Engines Need To Be Removed From Parts Stock
Product Support Program For Reworking The Customer Communication Module (CCM) On Certain Generator Sets And G3600 Industrial Engines Product Support Program For Reworking The Customer Communication Module (CCM) On Certain Generator Sets And G3600 Industrial Engines
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines. Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Installing A Fuel Line Bracket On 3412 Commercial Engines Installing A Fuel Line Bracket On 3412 Commercial Engines
Product Support Program For Fuel Injector Tips On Certain 3176 And 3176B Truck Engines And Challenger 75 And 85 Tractors Product Support Program For Fuel Injector Tips On Certain 3176 And 3176B Truck Engines And Challenger 75 And 85 Tractors
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.