1985/04/29 Caterpillar

Special Pricing On Metric Hand Tools For U.S. And Canada Only{0600,0601,0602}

Usage:

With the introduction of the small hydraulic excavator, dealer servicemen now need to include metric hand tools in their tool kits. Caterpillar currently offers three metric hand tool groups which should satisfy 90% of the fastener requirements for this product line. Effective immediately, these groups are available at a 20 to 30% reduction in dealer net prices. Some additional 3/4" drive sockets are also available at regular prices.

All of these tools are made of alloy steel and are heat treated to achieve the high standard of strength, toughness, ductility and fatigue resistance required by Caterpillar. Both the sockets and the combination wrenches (box end) incorporate a "flank" drive design. With this design, contact occurs on the flanks or flat areas of the drive surfaces on the tool and fastener. Corner contact is eliminated, thus prolonging the life of both tool and fastener.

The following special dealer net prices have been extended until June 30, 1985.

6V9121 Socket Group $ 20.75

6V9122 Socket Group $ 61.55

6V9123 Combo. Wrench Gp. $ 222.37

To order, contact your Morton Parts Order Analyst and reference OTO Number 11471.

Caterpillar Information System:

1985/04/29 Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}

1985/04/29 Scarifier Mounting Can Be Modified To Prevent Loosening{6150,6162}

1985/04/22 New Pins Used In Truck Body Group{7258}

1985/04/22 New Duo-Cone Seal Installer Is Available{0600,4051}

1985/04/22 Covers And Tandem Group Changed{4064,4062}

1985/04/22 FT1953 Gauge For Track Assembly{0600,0760}

1985/04/22 Correct Installation Of Oil Sequence Valves{1304}

1985/04/22 New Camshafts Used In SAE Standard [CCW] Rotation Engines{1200,1210}

1985/04/22 New Lamp Group Gives More Uniform Lighting{7300,7309}

1985/04/22 O-Ring Face Seal Fittings Available{5050,5057}

1985/04/22 Replace Grease Relief Fittings During Repair Of Front Suspension Cylinders{7200,7201}

1985/04/08 Constant Torque Hose Clamps Available For General Use{7550,7553}

1985/04/29 Visual Inspection Can Detect Chrome Plated Engine Valves{1105}

1985/04/29 Snubber Used To Protect Fuel Pressure Switch{1274}

1985/04/29 New Lever Available For Exhaust Piping Group{1061}

1985/05/06 Installation Instructions For New Magnetic Switch{1408}

1985/05/06 New Battery Cable Crimping Die Available{0600}

1985/05/06 New Bearing Housings Available For Turbochargers{1052,1053,1056}

1985/05/06 Folded Core Radiators Used In Cooling Systems{1353,1350,1351}

1985/05/06 System To Find Internal Fuel Leakage{1250}

1985/05/06 New Bolt And Seal For Brake Make-Up Oil Tank{5056}

1985/05/06 Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}

1985/05/06 Remanufactured Fuel Ratio Controls Are Available In U.S. And Canada{1278,7754}

1985/05/13 New Piston Seal For 139.7 mm (5.50") Hydraulic Cylinders{5456,5457,5104,5458}