1981/12/21 Caterpillar


Shorter Bolt Gives Clearance For Wiper Motor Linkage{7305,7300}

Usage:


All Motor Graders Equipped With 6G5555 Wiper Group

Description of Change: A shorter bolt is now used in the rear windshield wiper group on the above motor graders. This shorter bolt gives more clearance for the wiper motor linkage.

On some motor graders with the high-profile cab the wiper motor linkage has made contact with the former screws.

Adaptable As: The new 6L1569 Bolt and 1H3338 Lockwasher are direct replacements for the former 5P592 Screw and 1H3244 Lockwasher in this application.


Location of new parts in 6G5555 Wiper Group.

Caterpillar Information System:

1981/12/14 New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14 New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group{1272,1288}
1981/12/14 How To Remove The 7L4511 Sleeve Assembly From Aftercoolers{0620,1063}
1981/12/14 New Oil Level Gauge Used To Prevent Vibration{1300,1318,7450}
1981/12/14 New Flywheel Housing Gasket Used{1201,1157}
1981/12/14 6V4111 Adapters Available To Pull Spoke-Type Sprockets{4164,0623}
1981/12/14 Make Sure Coolant Conditioner Elements Are Changed At Correct Intervals{1350}
1981/12/14 New Valve Seat Used In Shift Pressure Valve Group{3152,3167}
1981/12/07 New Inlet Lines Used In Radiator Group{1353,1380}
1981/12/07 New Air Cleaner Group Has Six Clamps For Improved Seal{1051}
1981/12/07 6V4175 Socket Available For Worn Track Bolts{0612,4179}
1981/12/07 New Core Assembly Used In Transmission Oil Cooler Group{1375}
1981/12/21 Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1982/01/11 Check 14 Test Points In Less Than 5 Minutes With The 6V2150 Starting/Charging Analyzer Group{0651,1518,1406}
1982/01/11 Improved Head Gasket Has Larger Fire Ring To Decrease Fretting{1101,1201}
1982/01/11 Procedure Reduces Possibility Of Spraying Hot Hydraulic Oil When S.O.S. Sample Is Taken{0372,5068}
1982/01/11 "Sirs User Instructions" Available{0374}
1982/01/11 Use FT1555 Generator Rotor Removal Tool To Remove And Install Rotor Assembly{0626,0644,0665,4457}
1982/01/18 New Lever And Improved Link Used To Permit Full Movement Of Articulation Indicator{7476}
1982/01/18 New Adjustment Dimension For Master Cylinder Rod{4111}
1982/01/18 Coasting While In Neutral Causes Transmission Damage{3150,3176}
1982/01/18 Communicate With Photography{0336,7750}
1982/01/18 Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18 Larger Diameter Heater Control Shaft Gives Better Performance{7304}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.