Usage:
Start By:
a. Install the steering frame lock pin. Refer to Disassembly and Assembly, "Steering Frame Lock Pin - Remove and Install" for the machine that is being serviced.
1. Remove four bolts (2) and the washers that hold accelerator control (1) to the cab floor.
2. Remove three cable straps (3) that secure the wiring harness to the cab floor.
3. Disconnect the wiring harness from the accelerator control at electrical connector (4).
4. Remove accelerator control (2) from the cab.
Installation Procedure
1. Put accelerator control (1) in position in the cab, as shown.
2. Install four bolts (2) and the washers that hold accelerator control (1) to the cab floor.
3. Connect the wiring harness to the accelerator control at electrical connector (4).
4. Install three suitable cable straps (3) to secure the wiring harness to the cab floor, as shown.
End By:
a. Remove the steering frame lock pin. Refer to Disassembly and Assembly, "Steering Frame Lock Pin - Remove and Install" for the machine that is being serviced.