1990/07/01 Caterpillar


Boss Added To Keep Bolts From "Bottoming Out" In Expansion Tank Groups

Usage:


3508, 3512, 3516 Industrial, Marine, Generator Set Engines Built Prior To November 23, 1989

Description of Change: A boss is added to keep bolts from bottoming out in the expansion tank group. On earlier engines with the new expansion tank, four bolts could bottom out leaving the joint loose. The boss is located between the washer and the support.

Adaptable To: The new 8B9725 Boss has been added to 9Y5625 and 8N7717 Expansion Tank Groups. The boss is adaptable to earlier engines with the above expansion tank groups. Four bosses are required.


Location of new boss.

Caterpillar Information System:

1990/07/01 Special Instruction SEHS8700 Available For Installation Of Engine Flexible Mounting Group
1990/07/01 New Jacket Water Heater Groups Have New Thermostat
1990/07/01 New Water Regulator Prevents Leakage
1990/07/01 Valve Lifters Can Be Removed Without Removing Cylinder Heads
1990/07/01 Improved Turbocharger Bearing Kit Available For Parts Service
1990/07/01 New Spark Plug Seal Used
1990/07/01 Powdered Metal Valve Guides Provide Increased Service Life
1990/07/01 Solenoid Contacts May Corrode In 3T2648 Marine Starter
1990/07/01 Engine Rack Control Assemblies Improved
1990/07/01 New Fuel Setting Screw Cover And Bolt
1990/06/01 "Ugly's Electrical-References" SEBD0983, Now Available
1990/06/01 Testing The Starter On The Engine
1990/07/01 Improved Material Prevents Sagging Of Rear Manifold Section
1990/07/01 New Turbocharger Gas Inlet Housing Used
1990/07/01 Correct Position Of Regulator Housing On Combined Water Lines Group
1990/07/01 Welding On Fuel And Hydraulic Tanks
1990/07/01 Electrical System Damage From High Voltage
1990/07/01 New Digital Tachometers Available As Attachments
1990/07/01 List of Service Publications
1990/08/01 Changes To Exhaust Manifold Expansion Sleeves And Bolts
1990/08/01 New Manifolds And Bellows Assemblies Used In Exhaust Manifold Group
1990/08/01 New Aftercooler Gaskets Help Maintain Constant Bolt Torque{1063,1079}
1990/08/01 Stronger Fan Guard Resists Vibration Damage
1990/08/01 Improvements Reduce Vibration To The Low Water Level Switch On Expansion Tanks
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.