New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553}
- Cold Planer
- PM310 (S/N: KWA1-104; NMA1-113)
- PM312 (S/N: NJ91-123)
- PM313 (S/N: DK91-101; JH91-115)
- PM312 (S/N: NJ91-123)
- Engine
- C7 (S/N: C7S1-9999)
- C9 (S/N: MFF1-478; C9S1-1744)
- Industrial Engine
- C9.3 (S/N: C931-332; CA91-228; CP91-233; CS91-2664; MNG1-140; C9N1-1544; D9N1-5630)
- Petroleum Power Train Package
- TH31-C9T (S/N: PAY1-172)
Description Of Change: The new fuel injector solenoid used now has silver coating for the contacts to match the harness pin coatings to help prevent electrical faults.
Adaptable To:
Show/hide table
 |
|
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
The new 563-5865 Solenoid As replaces the previous solenoid assembly.
Caterpillar Information System:
New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553} New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553}
C18 Generator Set Belts - Inspect/Adjust/Replace
A New Torque is Now Used on the Diesel Exhaust Fluid (DEF) Nozzle on Certain 3500, C175, C280, and C32 Engines {108I} A New Torque is Now Used on the Diesel Exhaust Fluid (DEF) Nozzle on Certain 3500, C175, C280, and C32 Engines {108I}
120 Motor Graders Transmission Control Valve
120 Motor Graders Transmission Oil Lines
120 Motor Graders Valve Mounting
120 Motor Graders Front Axle (All Wheel Drive)
120 Motor Graders Front Frame
A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555} A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555}
A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555} A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555}
C175 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
The Engine Electronic Control Module May Become Unresponsive After Resets or Voltage Drops on Certain C9.3B Engines {1901} The Engine Electronic Control Module May Become Unresponsive After Resets or Voltage Drops on Certain C9.3B Engines {1901}
C18 Generator Set Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
G3500J Engines Overhaul (Major)
313 and 313 GC Excavator Monitoring System
120 Motor Graders Transmission Hydraulic Control
120 Motor Graders Accumulator Charging Valve
120 Motor Graders Air Conditioner Lines
120 Motor Graders Control Manifold (Implement, Steering)
320 GC, 320 and 323 Excavator Machine Systems Specifications Pilot Lines
120 Motor Graders Control Valve (Ripper)
313 and 313 GC Excavator Maintenance Interval Schedule
120 Motor Graders Piston Pump
120 Motor Graders Control Valve (Scarifier)