120 Motor Graders Caterpillar


Front Axle (All Wheel Drive)

Usage:

120 E93


Illustration 1g06381623
Typical example

Table 1
Item  Qty  Part  Specification Description 
290-3921 Axle Mounting Gp  Grease the pin and the bearing prior to assembly. 
D1  2G-5673 Washer  As required, use the washers to maintain the gap of maximum 2.0 mm (0.08 inch).
Thickness of one washer is 1.52 ± 0.23 mm (0.060 ± 0.009 inch)
264-1180 Pin  Diameter is 50.749 ± 0.025 mm (1.9980 ± 0.0010 inch)
8T-4139 Bolt  Torque to 105 ± 20 N·m (77 ± 15 lb ft)

Caterpillar Information System:

120 Motor Graders Front Frame
A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555} A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555}
A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555} A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555}
C175 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
The Engine Electronic Control Module May Become Unresponsive After Resets or Voltage Drops on Certain C9.3B Engines {1901} The Engine Electronic Control Module May Become Unresponsive After Resets or Voltage Drops on Certain C9.3B Engines {1901}
140 Motor Grader Power Train Piston Motor (Wheel Propel) - Assemble
140 Motor Grader Power Train Piston Motor (Wheel Propel) - Disassemble
The Outside Diameter Maybe Incorrect on the 563-9214 Crankshaft Seal Installation Gp Used for Certain Engines {0701} The Outside Diameter Maybe Incorrect on the 563-9214 Crankshaft Seal Installation Gp Used for Certain Engines {0701}
Procedure to Install the Fuel Tank Drain Kit on Certain 307.5, 308, 308.5, and 310 Mini Hydraulic Excavators {1274} Procedure to Install the Fuel Tank Drain Kit on Certain 307.5, 308, 308.5, and 310 Mini Hydraulic Excavators {1274}
G3500J Engines Throttle Control Valve - Check
320D3 Excavators Capacities (Refill)
C175 Tier 4 Final Engines for Caterpillar Built Machines Auxiliary Water Pump - Remove and Install
120 Motor Graders Valve Mounting
120 Motor Graders Transmission Oil Lines
120 Motor Graders Transmission Control Valve
A New Torque is Now Used on the Diesel Exhaust Fluid (DEF) Nozzle on Certain 3500, C175, C280, and C32 Engines {108I} A New Torque is Now Used on the Diesel Exhaust Fluid (DEF) Nozzle on Certain 3500, C175, C280, and C32 Engines {108I}
C18 Generator Set Belts - Inspect/Adjust/Replace
New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553} New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553}
New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553} New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553}
C18 Generator Set Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
G3500J Engines Overhaul (Major)
313 and 313 GC Excavator Monitoring System
120 Motor Graders Transmission Hydraulic Control
120 Motor Graders Accumulator Charging Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.