Engine Oil Cooler - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Ruglyde Rubber Lubricant | 1 |
- Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Show/hide table
Illustration 1 g06380798 - Remove eight bolts (3), two flanges (1), tube (2), and the O-ring seals.
Show/hide table
Illustration 2 g06380930 - Disconnect hoses (5).
- Remove bolts (4), bolts (7), and elbow (6).
Show/hide table
Illustration 3 g06380981 - Remove bolts (8), bolts (9), bolts (10), elbow (11), and the O-ring seals.
Show/hide table
Illustration 4 g06381249 - Remove bolts (12), tube (13), and the O-ring seals.
Show/hide table
Illustration 5 g06381271 - Remove bolts (14), bolts (17), bolts (18), elbow (16), flange (15), and the O-ring seals.
Show/hide table
Illustration 6 g06381464 - Attach a suitable lifting device to engine oil cooler (20). The weight of engine oil cooler (20) is approximately
145 kg (320 lb) . - Remove eight bolts (19), eight bolts (21), engine oil cooler (20), and the O-ring seals.
- Install engine oil cooler (20) in the reverse order of removal.
Caterpillar Information System:
The Engine Electronic Control Module May Become Unresponsive After Resets or Voltage Drops on Certain C9.3B Engines {1901} The Engine Electronic Control Module May Become Unresponsive After Resets or Voltage Drops on Certain C9.3B Engines {1901}
140 Motor Grader Power Train Piston Motor (Wheel Propel) - Assemble
140 Motor Grader Power Train Piston Motor (Wheel Propel) - Disassemble
The Outside Diameter Maybe Incorrect on the 563-9214 Crankshaft Seal Installation Gp Used for Certain Engines {0701} The Outside Diameter Maybe Incorrect on the 563-9214 Crankshaft Seal Installation Gp Used for Certain Engines {0701}
Procedure to Install the Fuel Tank Drain Kit on Certain 307.5, 308, 308.5, and 310 Mini Hydraulic Excavators {1274} Procedure to Install the Fuel Tank Drain Kit on Certain 307.5, 308, 308.5, and 310 Mini Hydraulic Excavators {1274}
G3500J Engines Throttle Control Valve - Check
320D3 Excavators Capacities (Refill)
C175 Tier 4 Final Engines for Caterpillar Built Machines Auxiliary Water Pump - Remove and Install
New High-Pressure Fuel Pumps Are Now Used on Certain C175 Powered 793F, 794F, and 797F Machine Engines {1255, 1256} New High-Pressure Fuel Pumps Are Now Used on Certain C175 Powered 793F, 794F, and 797F Machine Engines {1255, 1256}
G3500J Engines Safety Messages
320GC, 320 and 323 Excavators Machine Systems Pilot Valve (Joystick) - Assemble
320GC, 320 and 323 Excavators Machine Systems Pilot Valve (Joystick) - Disassemble
A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555} A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555}
A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555} A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555}
120 Motor Graders Front Frame
120 Motor Graders Front Axle (All Wheel Drive)
120 Motor Graders Valve Mounting
120 Motor Graders Transmission Oil Lines
120 Motor Graders Transmission Control Valve
A New Torque is Now Used on the Diesel Exhaust Fluid (DEF) Nozzle on Certain 3500, C175, C280, and C32 Engines {108I} A New Torque is Now Used on the Diesel Exhaust Fluid (DEF) Nozzle on Certain 3500, C175, C280, and C32 Engines {108I}
C18 Generator Set Belts - Inspect/Adjust/Replace
New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553} New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553}
New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553} New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553}
C18 Generator Set Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace