120 Motor Graders Caterpillar


Control Valve (Ripper)

Usage:

120 E92


Illustration 1g06382078

Table 1
Item  Qty  Part  Specification Description 
361-3549 O-Ring Seal  Lubricate seal lightly with fluid being sealed. 
3K-0360 O-Ring Seal  Lubricate seal lightly with fluid being sealed. 
9J-0403 Spring  Length under test force is 18.7 mm (0.73 inch).
Test force is 12.9 ± 1.0 N (2.9 ± 0.2 lb).
Free length after test is 25.1 mm (0.98 inch)
108-2187 Pipe Plug  Torque to 35 ± 7 N·m (26 ± 5 lb ft)
6E-5153 Spring  Length under test force is 16.1 mm (0.63 inch).
Test force is 13.80 ± 2.98 N (3.10 ± 0.66 lb).
Free length after test is 19.9 mm (0.78 inch)
9J-0404 Plug  Torque to 80 ± 4 N·m (59 ± 3 lb ft)
139-8472 Relief Valve Gp  Torque to 35 ± 7 N·m (26 ± 5 lb ft)
Tighten to 20 ± 2 N·m (177 ± 18 lb in)
111-8233 Spring  Spring must have Light blue stripe
Length under test force is 15.50 mm (0.610 inch).
Test force is 13.50 ± 0.80 N (3.03 ± 0.17 lb).
Free length after test is 25.60 mm (1.01 inch)
10  5B-9318 Ball  During assembly, lightly seat the ball into the body. 
11  6E-3007 Spring  Length under test force is 8.60 mm (0.338 inch).
Test force is 0.234 ± 0.024 N (0.052 ± 0.005 lb).
Free length after test is 10.0 mm (0.39 inch)
12  102-7412 Spring  Length under test force is 28.0 mm (1.10 inch).
Test force is 46.0 ± 2.4 N (10.3 ± 0.5 lb).
Free length after test is 48.42 mm (1.906 inch)
13  101-1971 Lever  Torque to 25 ± 6 N·m (221 ± 53 lb in)

Caterpillar Information System:

320 GC, 320 and 323 Excavator Machine Systems Specifications Pilot Lines
120 Motor Graders Control Manifold (Implement, Steering)
120 Motor Graders Air Conditioner Lines
120 Motor Graders Accumulator Charging Valve
120 Motor Graders Transmission Hydraulic Control
313 and 313 GC Excavator Monitoring System
G3500J Engines Overhaul (Major)
C18 Generator Set Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553} New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553}
New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553} New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553}
C18 Generator Set Belts - Inspect/Adjust/Replace
A New Torque is Now Used on the Diesel Exhaust Fluid (DEF) Nozzle on Certain 3500, C175, C280, and C32 Engines {108I} A New Torque is Now Used on the Diesel Exhaust Fluid (DEF) Nozzle on Certain 3500, C175, C280, and C32 Engines {108I}
313 and 313 GC Excavator Maintenance Interval Schedule
120 Motor Graders Piston Pump
120 Motor Graders Control Valve (Scarifier)
120 Motor Graders Fuel Tank
120 Motor Graders Drawbar
120 Motor Graders Piston Pump
Procedure to Access and Configure Functions on TD520 Cat® GRADE Display {7347, 7490, 7601, 7603, 7610, 7620} Procedure to Access and Configure Functions on TD520 Cat® GRADE Display {7347, 7490, 7601, 7603, 7610, 7620}
120 Motor Graders Articulation Cylinder
120 Motor Graders Drive Shaft
120 Motor Graders Engine Enclosure
120 Motor Graders Tandem and Cover
120 Motor Graders Flow Divider Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.