C32 Generator Set Engines Caterpillar

1. Connect Cat^® Electronic Technician (ET), release 2018B or newer.

2. Select the "Service" tab in Cat ET.

   1. Click "Engine Crankshaft Damper Replacement".
   Show/hide table

   Illustration 1	g06367833

3. Make sure that the engine is not running.
   Show/hide table

   Illustration 2	g06367846

4. Click the rest at the bottom of the screen. As shown in Illustration 2.
   Show/hide table

   Illustration 3	g06367820

5. Verify that the reset worked by reviewing the value column reading is 0. As shown in Illustration 3.

If the procedure did not correct the issue, contact your Cat Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solution Network (DSN).