3500 Engines Caterpillar


Engine Coolant Temperature Sensor

Usage:

3516C NG3


Illustration 1g02575237

Table 1
Item  Qty  Part  Specification Description 
Torque to 10 ± 2 N·m (89 ± 18 lb in)
Voltage supply is 5 ± 0.5 VDC.

Caterpillar Information System:

Improved Operating Information for the Engine Hood for Certain 320 GC, 320 and 323 Excavators {7251, 7276} Improved Operating Information for the Engine Hood for Certain 320 GC, 320 and 323 Excavators {7251, 7276}
3500 Engines Stub Shaft (Front)
Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070} Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070}
320D3 and 323D3 Excavators Systems Solenoid Valve (Proportional Reducing) - Power Shift System
3500 Engines Turbocharger Outlet Pressure Sensor
3500 Engines Turbocharger Inlet Pressure Sensor
3500 Engines Coolant Level Sensor
320D3 Hydraulic Excavator Engine Supplements Fan - Remove and Install
3500 Engines Flywheel Housing Cover
G3512 Gas Engine Flywheel Housing Cover
3500 Engines Air Shutoff
C7.1 Engines for Caterpillar Built Machines Fuel Filter Base - Primary and Secondary Fuel Filter Base
Updated Oil Pan Group is Now Used on Certain 3512C Locomotive Engines {1302} Updated Oil Pan Group is Now Used on Certain 3512C Locomotive Engines {1302}
320D3 Hydraulic Excavator Engine Supplements Cooling System Package (Radiator, Hydraulic Oil Cooler, and Aftercooler) - Remove and Install
320D3 Hydraulic Excavator Engine Supplements Cooling System Package (Radiator, Hydraulic Oil Cooler, and Aftercooler) - Assemble
G3500H Generator Set Engine Crankcase Pressure Is Low
C175-16 Petroleum Engine Fuel Priming Pump - Test
Rework Procedure for Power Cables on Certain C27 and C32 Generator Sets {4459} Rework Procedure for Power Cables on Certain C27 and C32 Generator Sets {4459}
C175-16 Petroleum Engine Injector Solenoid - Test
C175-16 Petroleum Engine Sensor Signal (Analog, Active) - Test
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Engine Supplement Engine - Remove and Install
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankcase Breather - Remove
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankcase Breather - Install
C7.1 (Mechanical) Engines for Caterpillar Built Machines Flywheel - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.