Cooling System Package (Radiator, Hydraulic Oil Cooler, and Aftercooler) - Assemble
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use two people to install hydraulic oil cooler (14). The weight of hydraulic oil cooler (14) is approximately
28 kg (62 lb) . - Install hydraulic oil cooler (14) and four bolts (15).
Show/hide table
Illustration 2 g06316719 - Use two people to install radiator (13). The weight of radiator (13) is approximately
16 kg (35 lb) . - Install radiator (13) and four bolts (12).
Show/hide table
Illustration 3 g06316718 - Use two people to install aftercooler (11). The weight of aftercooler (11) is approximately
16 kg (35 lb) . - Install aftercooler (11) and four bolts (10).
Show/hide table
Illustration 4 g06316717 - Position cover (9) and install five bolts (8) and four bolts (7).
Show/hide table
Illustration 5 g06316716 - Install sheet assembly (3), two bolts (6), two bolts (5), and four bolts (4).
Show/hide table
Illustration 6 g06316714 Typical Example - Install sheet assembly (1) and bolts (2).
Show/hide table
Illustration 1 | g06316720 |
End By:
- Install the Cooling system package (Radiator, Hydraulic Oil Cooler, and Aftercooler).
Caterpillar Information System:
320D3 Hydraulic Excavator Engine Supplements Cooling System Package (Radiator, Hydraulic Oil Cooler, and Aftercooler) - Remove and Install
Updated Oil Pan Group is Now Used on Certain 3512C Locomotive Engines {1302} Updated Oil Pan Group is Now Used on Certain 3512C Locomotive Engines {1302}
3500 Engines Engine Coolant Temperature Sensor
Improved Operating Information for the Engine Hood for Certain 320 GC, 320 and 323 Excavators {7251, 7276} Improved Operating Information for the Engine Hood for Certain 320 GC, 320 and 323 Excavators {7251, 7276}
3500 Engines Stub Shaft (Front)
Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070} Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070}
320D3 and 323D3 Excavators Systems Solenoid Valve (Proportional Reducing) - Power Shift System
3500 Engines Turbocharger Outlet Pressure Sensor
3500 Engines Turbocharger Inlet Pressure Sensor
3500 Engines Coolant Level Sensor
320D3 Hydraulic Excavator Engine Supplements Fan - Remove and Install
3500 Engines Flywheel Housing Cover
G3500H Generator Set Engine Crankcase Pressure Is Low
C175-16 Petroleum Engine Fuel Priming Pump - Test
Rework Procedure for Power Cables on Certain C27 and C32 Generator Sets {4459} Rework Procedure for Power Cables on Certain C27 and C32 Generator Sets {4459}
C175-16 Petroleum Engine Injector Solenoid - Test
C175-16 Petroleum Engine Sensor Signal (Analog, Active) - Test
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Engine Supplement Engine - Remove and Install
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankcase Breather - Remove
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankcase Breather - Install
C7.1 (Mechanical) Engines for Caterpillar Built Machines Flywheel - Remove
C7.1 (Mechanical) Engines for Caterpillar Built Machines Flywheel - Install
320D3 and 323D3 Excavators Machine System Specifications Bucket Linkage - B1 Family
C7.1 (Mechanical) Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install