C7.1 Engines for Caterpillar Built Machines Caterpillar


Fuel Filter Base - Primary and Secondary Fuel Filter Base

Usage:

336 GC EBJ


NOTICE

Refer to Systems Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.


If necessary, install new fuel filters. Refer to Operation and Maintenance Manual for the correct procedures.



Illustration 1g06320554
Typical example

(1) Tighten the pressure sensor to the following torque. ... 13 N·m (115 lb in)

(2) Tighten the connection to the following torque. ... 23 N·m (204 lb in)

(3) Tighten the bolts to the following torque. ... 6 N·m (53 lb in)

(4) Tighten the plugs to the following torque. ... 30 N·m (266 lb in)

(5) Tighten the adaptor to the following torque. ... 30 N·m (266 lb in)

(6) Tighten the temperature sensor to the following torque. ... 20 N·m (177 lb in)

(7) Tighten the connection to the following torque. ... 15 N·m (133 lb in)

(8) Tighten the sensor to the following torque. ... 2.5 N·m (22 lb in)

Caterpillar Information System:

Genset Package Connection Group Cables Melting {445B, 4460} Genset Package Connection Group Cables Melting {445B, 4460}
Procedure for Engine Idle Reduction System Upgrade on Certain 3512E Engines {1901, 1920} Procedure for Engine Idle Reduction System Upgrade on Certain 3512E Engines {1901, 1920}
G3500H Generator Set Engine Crankcase Pressure Is High
New Engine Software Is Now Used For Certain G3512 and G3516 Engines {1920} New Engine Software Is Now Used For Certain G3512 and G3516 Engines {1920}
3500 Engines Air Lines
320D3 and 323D3 Excavators Systems Relief Valve (Cushion Crossover) - Anti-Reaction Valve
3500 Engines Thermocouple
320D3 and 323D3 Excavators Machine System Specifications Gear Pump
C27 and C32 Tier 4 Engines Air Shutoff - Test
C18 Generator set and C18 Marine Engines Alternator - Remove and Install
3500 Engines Air Starting Motor
Diesel Particulate Filter (DPF)/Selective Catalytic Reduction (SCR) Intake Temperature Sensor Troubleshooting on Certain C7.1 Engines {107C, 108F, 1919, 7569} Diesel Particulate Filter (DPF)/Selective Catalytic Reduction (SCR) Intake Temperature Sensor Troubleshooting on Certain C7.1 Engines {107C, 108F, 1919, 7569}
3500 Engines Air Shutoff
G3512 Gas Engine Flywheel Housing Cover
3500 Engines Flywheel Housing Cover
320D3 Hydraulic Excavator Engine Supplements Fan - Remove and Install
3500 Engines Coolant Level Sensor
3500 Engines Turbocharger Inlet Pressure Sensor
3500 Engines Turbocharger Outlet Pressure Sensor
320D3 and 323D3 Excavators Systems Solenoid Valve (Proportional Reducing) - Power Shift System
Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070} Bench Test Procedure for Hydraulic Piston Pumps {0784, 5070}
3500 Engines Stub Shaft (Front)
Improved Operating Information for the Engine Hood for Certain 320 GC, 320 and 323 Excavators {7251, 7276} Improved Operating Information for the Engine Hood for Certain 320 GC, 320 and 323 Excavators {7251, 7276}
3500 Engines Engine Coolant Temperature Sensor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.