Engine Mounting
Show/hide table
| |
| Illustration 1 | g06289507 |
|
Typical example Right side view | |
Show/hide table
| Item | Qty | Part | Specification description |
| 1 | 2 | 447-1721 Bolt | Torque to |
| 2 | 2 | 447-1715 Bolt | Torque to |
| 3 | 2 | 118-9930 Support As | Install the support assembly so that the plate is on the bottom. Refer to the Illustration 1 for the correct orientation of the support assembly. |
Show/hide table
| |
| Illustration 2 | g06289510 |
|
Rear view | |
Show/hide table
| Item | Qty | Part | Specification description |
| 4 | 2 | 139-8873 Support As | Install the support assembly from the machine center side. Refer to the Illustration 2 for the correct orientation of the support assembly. |
Caterpillar Information System:
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Information (Main Control Valve)
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Information (Main Pump System)
336, 336 GC and 340 Excavator Systems Drift Reduction Valve
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Water Temperature Regulator - Remove and Install
336, 336 GC and 340 Excavator Systems Stick Cylinder
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Return Lines
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Pump Lines
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Pilot Lines
336, 336 GC and 340 Excavator Systems Stick
301.5, 301.6, 301.7CR, 301.8, 302CR Mini Hydraulic Excavators Machine System Joystick Control
336, 336 GC and 340 Excavator Systems Stick
336, 336 GC and 340 Excavator Systems Drain Line
336 Excavators (Powered by C9.3 Tier 4 Engine) Engine Supplement Temperature Sensor (DPF) - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Centrifugal Oil Filter - Assemble
336, 336 GC and 340 Excavator Systems Swing Motor
Rework Procedure for Muffler/Silencers on Certain G3516 Power Modules {1062} Rework Procedure for Muffler/Silencers on Certain G3516 Power Modules {1062}
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System General Information (Boom System)
Thermocouples May Fail on Certain G3500 Engines {7498} Thermocouples May Fail on Certain G3500 Engines {7498}
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Control Valve (Boom Lowering)
797 Transmission Planet Shaft Plug Removal, Clean Planet Shaft Lube Passages and Install New Plug Procedures {0599, 0700, 0722, 3160} 797 Transmission Planet Shaft Plug Removal, Clean Planet Shaft Lube Passages and Install New Plug Procedures {0599, 0700, 0722, 3160}
336 and 336 GC Excavator Parking
Regulatory Compliance Information Radio Detection and Ranging (Radar) - C5 Radar - If Equipped
336 and 336 GC Excavator Engine Air Filter Primary and/or Secondary Element - Replace
336 and 336 GC Excavator Fuel Tank Water and Sediment - Drain