797F Off-Highway Truck Caterpillar

Caterpillar products such as engines, transmissions, and major components or attachments are identified by Serial Numbers (S/N).

For quick reference, record the identification numbers in the spaces that are provided below the illustration.

Product Identification Number (PIN)

Illustration 1	g01970433

The Product Identification Number (PIN) is located on the front left side of the frame. PIN plate (1) may have the following information:

Illustration 2	g02436556

Model number (A)____________________

Product Identification Number (B)____________________

Service Information Plate (C)____________________

Month and Year of Manufacture Plate (D) (If Required) ____________________

CE Plate (E) (If Required) Refer to "European Union" below

Country of Origin Info Plate (F) (If Required) ____________________

Local regulation may require documentation of the Month and/or Year of Manufacture in the Operations and Maintenance Manual. Enter on line (D) above if required.

Eurasian Economic Union

For machines compliant to the Eurasian Economic Union requirements, the EAC mark plate is positioned near the Product Identification Number (PIN) plate (see Product Information Section of the machine Operation and Maintenance Manual). The EAC mark plate is placed on machines certified to the Eurasian Economic Union requirements effective at the time of market entry.

Illustration 3	g06094564

The Month and Year of Manufacture are on the PIN plate.

Manufacturer Information

Manufacturer:

Entity authorized by the manufacturer at the territory of Eurasian Economic Union:

European Union

Illustration 4	g01880193

This plate is positioned on the bottom left side of PIN plate (1).

Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.

For machines compliant to 2006/42/EC, the following information is stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.

Engine Power Primary Engine (kW):

____________________

Engine Power for Additional Engine (If Equipped):

____________________

Typical Machine Operating Weight for European Market (kg):

____________________

Year of Construction:

____________________

Machine Type:

____________________

Serial Number Plate (SN)

Illustration 5	g01764853

(2) Dump Body Serial Number:

____________________

Illustration 6	g01984295

(3) Transmission Serial Number:

____________________

Illustration 7	g01984298

(4) Engine Serial Number:

____________________

Illustration 8	g01984297

(5) Torque Converter Serial Number:

____________________

Illustration 9	g02006914

(6) Differential Serial Number:

____________________

Illustration 10	g02006933

(7) Rear Wheel Serial Number

Left:____________________

Right:____________________

Illustration 11	g02006935

(8) Front Wheel Serial Number

Left:____________________

Right:____________________

Illustration 12	g06253960

(9) Pump Electronics Tank Unit Serial Number

____________________

Illustration 13	g06253963

(10) Clean Emission Module Serial Number

____________________

Certification

ROPS/FOPS Plate

This certification plate is located outside the cab on the right side of the ROPS.

Show/hide table

Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.

Illustration 14	g01125202

This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a body or a payload, should not exceed the mass on the certification plate.