Display Setup - CMD5
Show/hide table
Illustration 1 | g06241154 |
Default Screens |
To set up the display, connect the service harness to the display and power up. Once powered, you will see the following default screens shown in Illustrations 1.
Show/hide table
Illustration 2 | g06241156 |
The screens are customizable and done by navigating through the different screen options to set as a custom default screens preferred by the user such as the following shown in Illustration 2.
When flashing the display, follow these steps:
- Format a USB disk by right-clicking on the drive in your laptop and select 'Format'.
Show/hide table
Illustration 3 g06249736 - Set File System to FAT,
- Save the file to the USB by clicking 'Start'.
- Right Click on the USB with saved file and select 'Eject'.
No service passwords are required with the CMD5.
Show/hide table
Illustration 4 | g06241180 |
Main Screens |
Show/hide table
Illustration 5 | g06241181 |
Port Configuration |
Show/hide table
Illustration 6 | g06241182 |
Starboard Configuration |
Show/hide table
Illustration 7 | g06241182 |
Day Mode |
Show/hide table
Illustration 8 | g06241183 |
Night Mode |
Show/hide table
Illustration 9 | g06241184 |
Port |
Show/hide table
Illustration 10 | g06241185 |
Starboard |
- Verify that the file name of you Splash Screen image does not contain any <space>.
- EX) "CustomerScreen1.jpg"
- Image Resolution: CMD5-800x480, CMD7–800x480, and CMD13-1280x800
Caterpillar Information System:
320GC and 320 Excavator Engine Supplement Turbocharger - Remove and Install - First Stage
XQ125 Generator Set Starting Motor - Inspect
Installation and Initial Start-Up Procedure for G3500 TA Engines {0374, 1000, 7000} Installation and Initial Start-Up Procedure for G3500 TA Engines {0374, 1000, 7000}
XQ125 Generator Set Model View Illustrations
XQ125 Generator Set Safety Messages
320GC, 320 and 323 Excavators Machine Systems Window Wiper Motor - Remove and Install
320GC and 320 Excavator Engine Supplement Temperature Sensor (DPF) - Remove and Install
320GC and 320 Excavator Engine Supplement Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
336, 336 GC and 340 Excavator Systems Bucket System
G3500H 50Hz Generator Sets Sound Information
336, 336 GC and 340 Excavator Systems Stick System
336, 336 GC and 340 Excavator Systems Main Control Valve
Electric Starters May be Incorrectly Configured as Primary on Certain Cat® Generator Sets {1453, 1920} Electric Starters May be Incorrectly Configured as Primary on Certain Cat® Generator Sets {1453, 1920}
XQ125 Generator Set Engine Oil and Filter - Change
Excessive Radiant Heat May Cause Melting of Components on Certain DG30 Generator Sets {1067, 1408} Excessive Radiant Heat May Cause Melting of Components on Certain DG30 Generator Sets {1067, 1408}
320GC and 320 Excavator Engine Supplement Turbocharger - Remove and Install - Second Stage
C27 and C32 Engine for MD6250 and MD6310 Drill Injector Solenoid - Test
794 AC Off-Highway Truck Engine Supplement Engine - Remove
794 AC Off-Highway Truck Engine Supplement Engine - Install
XQ125 Generator Set Cooling System Coolant (ELC) - Change
XQ125 Generator Set Diesel Exhaust Fluid Tank - Flush
C9.3B Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
320GC, 320 and 323 Excavators Machine Systems Swivel - Disassemble
320GC, 320 and 323 Excavators Machine Systems Swivel - Assemble