New Service Tools Available
Usage:
The chart shows new tools available from Caterpillar. More detailed information is given in the Tool Announcement for each tool. The Tool Announcements have been distributed and a copy should be filed in the Tool Guide.
Some tools have a Special Instruction that shows how to use the tool. If available, the Special Instruction Form Number is shown in the last column of the chart along with the Tool Announcement form number.
See your Caterpillar dealer for additional information about these tools or for drawings of the Fabricated Tools.
Caterpillar Information System:
1985/02/01 Install Crankshaft Thrust Bearings Correctly To Avoid Damage
1985/02/01 Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors
1985/02/01 New Flashlight On 6V5000 Infrared Thermometer Group
1985/02/01 Call Toll-Free Numbers For Location Of Nearest Caterpillar Marine Engine Dealer
1985/02/01 Low Oil Level In Governor Can Cause Erratic Engine RPM
1985/01/16 New And Improved Gaskets In Front Housing Group And Accessory Drive Group
1985/01/16 New Air Pipe Retainers Used To Connect Turbocharger To Aftercooler
1985/01/16 New Engine Time Requirement Guides (TRG)
1985/01/16 New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/16 Fill Oil Sump Before Installing Woodward Governor
1985/01/16 Correct Specifications For Crankshaft Deflection
1985/01/16 List of Service Publications
1985/02/01 New Rear Crankshaft Seal Has Longer Service Life
1985/02/01 New Temperature Recorders Available
1985/02/01 Wiring Harness Conduit Component Sizes
1985/02/01 New Air Cleaner Groups And Valve Mechanism Cover Group Used
1985/02/01 Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators
1985/02/01 Tighten Bolts To Correct Torque In 3161 Governor
1985/02/01 1985 Customer Training Available At Caterpillar Dealers (North America)
1985/03/01 New Service Tools Available
1985/03/01 A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01 Over Fueling Spring No Longer Used In Governor
1985/03/01 Exhaust Clamp Nut Now Serviced Separately
1985/03/01 Do Not Weld On Painted Surfaces