120 and 120 AWD Motor Grader Caterpillar


Jacking Locations

Usage:

120 E94

------ PERINGATAN! ------

Cedera atau bahkan kematian dapat terjadi akibat pengangkatan atau pengganjalan yang tidak benar.

Sewaktu menggunakan dongkrak untuk mengangkat alat berat, harap tidak berada di daerah pengangkatan. Gunakan dongkrak yang memiliki kapasitas yang sesuai untuk mengangkat alat berat. Pasang ganjal atau topangan sebelum melakukan pekerjaan lain pada alat berat.


Bagian Depan Alat Berat

Sebelum bagian depan alat berat diangkat, periksa informasi berikut ini:

  • Rem parkir dipasang.

  • Baut penguncian kecondongan roda ada di posisi gandar depan.

  • Pin penguncian rangka telah terpasang.

  • Ban belakang telah tercekat.

  • Kapasitas angkat dongkrak sudah sesuai untuk berat dari alat berat. Baca Buku Petunjuk Pengoperasian dan Perawatan, "Spesifikasi" untuk berat dari alat berat.


Ilustrasi 1g01112402

Lokasi untuk menempatkan dongkrak bagian depan alat berat ada di bawah gandar depan.

Bagian Belakang Alat Berat

Sebelum bagian belakang alat berat diangkat, periksa informasi berikut ini:

  • Kontrol transmisi ada di posisi netral, dan sakelar rem parkir diaktifkan.

  • Baut penguncian kecondongan roda ada di posisi gandar depan.

  • Pin penguncian rangka telah terpasang.

  • Bagian belakang ban telah tercekat.

  • Kapasitas angkat dongkrak sudah sesuai untuk berat dari alat berat. Baca Buku Petunjuk Pengoperasian dan Perawatan, "Spesifikasi" untuk berat dari alat berat.


Ilustrasi 2g03847500

Lokasi untuk menempatkan dongkrak bagian belakang alat berat ada di bawah frame utama di bagian belakang alat berat.

Caterpillar Information System:

3512E Tier 4 Final Engines for Land Electric Drilling Engine Oil Cooler
3512E Tier 4 Final Engines for Land Electric Drilling Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E and C15 Truck Engines {1123} Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E and C15 Truck Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123} Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123} Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
330 GC and 330 Excavator Diesel Exhaust Fluid Filter - Replace - C7.1 Engine
PM820, PM822, and PM825 Cold Planer Machine Systems Piston Motor (Hydraulic Fan) - Assemble
PM820, PM822, and PM825 Cold Planer Machine Systems Piston Motor (Hydraulic Fan) - Disassemble
3512E Tier 4 Final Engines for Land Electric Drilling NOx Reduction System (NRS) - Test
120 and 120 AWD Motor Grader Stopping the Machine
336 and 336 GC Excavator Radiator, Aftercooler and Oil Cooler Cores - Clean
320GC, 320 and 323 Excavators Machine Systems Counterweight - Remove and Install
A New Hose is Now Available for Certain 3412 Series Engines {1074, 1317} A New Hose is Now Available for Certain 3412 Series Engines {1074, 1317}
C7.1 Generator Sets Maintenance Interval Schedule - Standby
797 Off-Highway Truck Steering Cylinder - Remove and Install - If equipped with Special Nuts
C7.1 Generator Sets Maintenance Interval Schedule - Prime Power
A New Flow Limiter Is Now Used for Certain C175 Engines {127A, 1288} A New Flow Limiter Is Now Used for Certain C175 Engines {127A, 1288}
320 GC, 320 and 323 Excavator Oil Filter (Hydraulic Hammer) - Replace
Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512B 1000 RPM Engines {1250, 1280} Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512B 1000 RPM Engines {1250, 1280}
C280-16 Marine Propulsion Engine Event Codes
C280-16 Marine Propulsion Engine SCR Catalyst Temperature Sensor - Test
C280-16 Marine Propulsion Engine DEF Tank Level Is Low
C280-16 Marine Propulsion Engine Diagnostic Trouble Codes
3512E Tier 4 Final Engines for Land Electric Drilling Radiator
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.