Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512B 1000 RPM Engines {1250, 1280} Caterpillar


Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512B 1000 RPM Engines {1250, 1280}

Usage:

3512B ED3
Engine
3512B (S/N: ED31-UP; S2G1-UP)

Refer to Special Instructions, M0077431Retrofitting for the Dynamic Gas Blending Capability on Certain 3512B Engines for more detailed information.

The Dynamic Gas Blending (DGB) upgrade kit provides a way to use gas and diesel simultaneously in a power application. DGB continuously optimizes gas substitution while maintaining diesel power and transient performance to optimize fuel savings.

The DGB automatically adjusts to changes in incoming fuel quality and pressure, allowing your engines to run on a wide variety of fuels, from associated gas to gasified Liquid Natural Gas (LNG).

Caterpillar Information System:

320 GC, 320 and 323 Excavator Oil Filter (Hydraulic Hammer) - Replace
A New Flow Limiter Is Now Used for Certain C175 Engines {127A, 1288} A New Flow Limiter Is Now Used for Certain C175 Engines {127A, 1288}
C7.1 Generator Sets Maintenance Interval Schedule - Prime Power
797 Off-Highway Truck Steering Cylinder - Remove and Install - If equipped with Special Nuts
C7.1 Generator Sets Maintenance Interval Schedule - Standby
A New Hose is Now Available for Certain 3412 Series Engines {1074, 1317} A New Hose is Now Available for Certain 3412 Series Engines {1074, 1317}
120 and 120 AWD Motor Grader Jacking Locations
3512E Tier 4 Final Engines for Land Electric Drilling Engine Oil Cooler
3512E Tier 4 Final Engines for Land Electric Drilling Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E and C15 Truck Engines {1123} Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E and C15 Truck Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123} Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123} Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
C280-16 Marine Propulsion Engine Event Codes
C280-16 Marine Propulsion Engine SCR Catalyst Temperature Sensor - Test
C280-16 Marine Propulsion Engine DEF Tank Level Is Low
C280-16 Marine Propulsion Engine Diagnostic Trouble Codes
3512E Tier 4 Final Engines for Land Electric Drilling Radiator
3512E Tier 4 Final Engines for Land Electric Drilling Gear Group (Front)
3512E Tier 4 Final Engines for Land Electric Drilling Fumes Disposal Group
3512E Tier 4 Final Engines for Land Electric Drilling Gear Group (Front)
3512E Tier 4 Final Engines for Land Electric Drilling Fuel Injection Pump
Turbocharger Wastegate Actuator on Certain C7.1 Engines {1052, 1053} Turbocharger Wastegate Actuator on Certain C7.1 Engines {1052, 1053}
3512E Tier 4 Final Engines for Land Electric Drilling Auxiliary Water Pump
3512E Tier 4 Final Engines for Land Electric Drilling Exhaust Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.