Fuel Lines
Show/hide table
Illustration 1 | g06210416 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
1 | 1 | 442-6314 Fuel Line | Use the following procedure to tighten the fuel line:
1. Before Assembly, Lubricate threads, collars and O-ring seals lightly with clean engine oil, and start connecting nuts on fuel line assembly at right-hand union fitting and accumulator. 2. Tighten fuel line from union to accumulator, starting with accumulator connection to 3. Using a separate wrench on the fuel line for support, tighten the right-hand cross over line to the right-hand union to 4. Tighten right-hand cross over line to accumulator to 5. Using separate wrench on the fuel line union for support, tighten the right-hand cross over line to the right-hand union to |
2 | 1 | 436-9987 Fuel Line | Use the following procedure to tighten the fuel line:
1. Before Assembly, Lubricate threads, collars and O-ring seals lightly with clean engine oil, and start connecting nuts on fuel line assembly at left-hand and right-hand union fittings. 2. Using a separate wrench on the fuel line for support, tighten the right-hand cross over line to the left-hand union to 3. Using separate wrench on the fuel line union for support, tighten the left-hand cross over line to the right-hand union to |
3 | 2 | 443-0731 Union | Use the following procedure to tighten the union:
1. Before Assembly, Lubricate threads, collars and O-ring seals lightly with clean engine oil, and start connecting nuts on fuel line assembly at junction block and fuel line union. 2. Lubricate threads, collars and O-ring seals lightly with clean engine oil, and start connecting nuts on fuel line assembly at right-hand union fitting and accumulator. 3. Lubricate threads, collars and O-ring seals lightly with clean engine oil, and start connecting nuts on fuel line assembly at left-hand and right-hand union fittings. 4. Tighten fuel line from union to accumulator, starting with accumulator connection to 5. Using a separate wrench on the fuel line for support, tighten the right-hand cross over line to the right-hand union to 6. Using a separate wrench on the fuel line for support, tighten the left-hand cross over line to the left-hand union to 7. Tighten left-hand cross over fuel line to junction box to 8. Tighten right-hand cross over line to accumulator to 9. Using separate wrench on the fuel line union for support, tighten the right-hand cross over line to the right-hand union to 10.Using separate wrench on the fuel line union for support, tighten the left-hand cross over line to the left-hand union to 11. Using separate wrench on the fuel line union for support, tighten the left-hand cross over line to the right-hand union to |
4 | 1 | 442-6310 Fuel Line | Use the following the procedure to tighten the fuel lines:
1. Before Assembly, Lubricate threads, collars and O-ring seals lightly with clean engine oil, and start connecting nuts on fuel line assembly at left-hand and right-hand union fittings. 2. Tighten the fuel line from the junction block to left-hand union, starting at the junction block connection to, 3. Using a separate wrench on the fuel line for support, tighten the left-hand cross over line to the left-hand union to 4. Tighten left-hand cross over fuel line to junction box to 5. Using separate wrench on the fuel line union for support, tighten the left-hand cross over line to the left-hand union to |
5 | 1 | 473-7645 Fuel Line | Use the following the procedure to tighten the fuel lines:
1. Before Assembly, Lubricate threads, collars and O-ring seals lightly with clean engine oil, and start connecting nuts on fuel line assembly at junction block and accumulator. 2. Tighten the fuel line from the junction block to accumulator, starting at the accumulator connection to, 3. Tighten fuel line from junction block to accumulator, starting with accumulator connection |
6 | 1 | 444-5604 Fuel Line | Use the following the procedure to tighten the fuel lines:
1. Before Assembly, Lubricate threads, collars and O-ring seals lightly with clean engine oil, and start connecting nuts on fuel line assembly at pump and junction block. 2. Tighten the fuel line from the pump to junction block, starting at the pump connection to, 3. Tighten fuel line from pump to junction block, starting with pump connection to |
Caterpillar Information System:
XQP1100 Generator Set Coolant (ELC) - Change
XQP1100 Generator Set Coolant (DEAC) - Change
3512E Tier 4 Final Engines for Land Electric Drilling Engine Coupling
3512E Tier 4 Final Engines for Land Electric Drilling Coupling Fastener
3512E Tier 4 Final Engines for Land Electric Drilling Exhaust Support
Electric Starting Motor on Certain C7.1 Engines {1453} Electric Starting Motor on Certain C7.1 Engines {1453}
3512E Tier 4 Final Engines for Land Electric Drilling Water Pump
3512E Tier 4 Final Engines for Land Electric Drilling Engine Oil Pan
3512E Tier 4 Final Engines for Land Electric Drilling Fuel Filter (Primary)
New Water Pump Troubleshooting is Now Used for Certain C15 and C18 Machine Engines {1361, 7569} New Water Pump Troubleshooting is Now Used for Certain C15 and C18 Machine Engines {1361, 7569}
New Water Pump Troubleshooting is Now Used for Certain C15 and C18 Engines {1371, 7569} New Water Pump Troubleshooting is Now Used for Certain C15 and C18 Engines {1371, 7569}
336 and 336 GC Excavator Hydraulic System Oil Filter (Return) - Replace
320GC, 320 and 323 Excavators Machine Systems Counterweight - Remove and Install
336 and 336 GC Excavator Radiator, Aftercooler and Oil Cooler Cores - Clean
120 and 120 AWD Motor Grader Stopping the Machine
3512E Tier 4 Final Engines for Land Electric Drilling NOx Reduction System (NRS) - Test
PM820, PM822, and PM825 Cold Planer Machine Systems Piston Motor (Hydraulic Fan) - Disassemble
PM820, PM822, and PM825 Cold Planer Machine Systems Piston Motor (Hydraulic Fan) - Assemble
330 GC and 330 Excavator Diesel Exhaust Fluid Filter - Replace - C7.1 Engine
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123} Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123} Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E and C15 Truck Engines {1123} Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E and C15 Truck Engines {1123}
3512E Tier 4 Final Engines for Land Electric Drilling Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
3512E Tier 4 Final Engines for Land Electric Drilling Engine Oil Cooler