1984/07/11 Caterpillar


New Mechanical Service Meter Used

Usage:


3400 And 3500 Series Industrial, Marine And Generator Set Engines Equipped With A 9S8722 Service Meter

Description of Change: New mechanical service meters are used in the above engines. The internal components in the new service meters have better protection from corrosion than those in the former service meter.

Adaptable As: The new 4W5556 Meter Group is a direct replacement for the former 9S8722 Meter Group, which is canceled.

Caterpillar Information System:

1984/07/11 MG507 Marine Transmission Uses Metric Fasteners
1984/07/11 New Crankshaft, Cylinder Block And Camshaft Used
1984/07/11 Quadrants Improved In Governor Control Groups
1984/07/11 Alternator Available For General Use
1984/07/11 New Ammeter And Ammeter Calibrator Group Available
1984/07/11 A New Baffle Plate And Oil Pump Drive Sleeve Are Used In Marine Transmissions
1984/07/11 New Rear Crankshaft Seal Group Used
1984/07/11 New Disassembly And Assembly Tools Available For Fuel Ratio Controls
1984/07/11 New Relief Valve Guide Used In Oil Pump
1984/07/11 Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/07/11 List Of Service Publications
1984/07/11 Modification To FT1488 Exciter Tester Group Allows Testing Of All Small Frame SR4 Generators
1984/08/08 Make Sure Crankshaft Is Installed Correctly
1984/08/08 Use Caution When Handling Components That Contain Asbestos
1984/08/08 List Of Service Publications
1984/08/08 Installation Instructions For Turbocharger Bearing Kit
1984/08/08 New Service Tools Available
1984/08/08 Use Vacuum Tester For Quality Control Check Of Water Pump Seal
1984/08/08 FT1886 Valve Spring Compressor Group Available
1984/08/22 New Thermistor Thermometer Group Can Be Ordered At Less Cost
1984/08/22 New Films (Decals) Available For Service Meter Face
1984/08/22 Instrument Panels Improved
1984/08/22 New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22 Two New High Speed Marine Transmissions Can Be Used With 3500 Series Engines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.