Engine Starting
If a warning tag is attached to the engine start switch or to the machine controls, do not start the engine. Also, do not move any machine controls.
- Adjust the operator seat.
- Fasten the seat belt.
- Before you start the engine, check for the presence of bystanders or maintenance personnel. Ensure that all personnel are clear of the machine. Briefly sound the horn before you start the engine.
- Engage the parking brake.
- Place the transmission control switch in NEUTRAL.
- Turn the key to the on position.
- Align the left-hand joystick relative to the position of the front wheels. Refer to Operation and Maintenance Manual, "Operator Controls - Joystick Steering Alignment" for more information.
- Turn and hold the key in the start position. Once the engine starts, release the ignition key.
- Confirm steering control by actuating the steering control with the left joystick. If the steering is not engaged, the primary steering indicator will illuminate. Refer to Operation and Maintenance Manual, "Monitoring System" for more information. Realign the left joystick if necessary.
- Disengage the parking brake.
- Select your desired FORWARD or REVERSE direction and select your requested gear.
Diesel engine exhaust contains products of combustion which can be harmful to your health. Always start the engine in a ventilated area. Always operate the engine in a ventilated area. If you are in an enclosed area, vent the exhaust to the outside.
Caterpillar Information System:
C9.3B Engines for Caterpillar Built Machines Water Pump - Assemble
320 GC, 320 and 323 Excavator Swing Gear - Lubricate
320 GC, 320 and 323 Excavator Swing Drive Oil Sample - Obtain
C9.3B Aftertreatment Systems Sensor (Data Link Type) - Test
G3600 A4 Engines Plate Locations and Film Locations
CX38-P892 Well Servicing Transmission Transmission Control
C9.3B Industrial Engine Engine Oil and Filter - Change
C9.3B Industrial Engine Refill Capacities
120 and 120 AWD Motor Grader Cooling Cores - Clean
120 and 120 AWD Motor Grader Specifications
120 and 120 AWD Motor Grader Operation
CX38-P892 Well Servicing Transmission Modulating Valve (Electronic Clutch Pressure Control)
120 and 120 AWD Motor Grader Engine Starting
120 and 120 AWD Motor Grader Stopping the Engine
120 and 120 AWD Motor Grader Stopping the Engine if an Electrical Malfunction Occurs
120 and 120 AWD Motor Grader Shipping the Machine
120 and 120 AWD Motor Grader Lifting and Tying Down the Machine
120 and 120 AWD Motor Grader Engine Starting with Jump Start Cables
120 and 120 AWD Motor Grader Engine Starting with Auxiliary Start Receptacle
120 and 120 AWD Motor Grader Backup Alarm - Test
120 and 120 AWD Motor Grader Battery or Battery Cable - Inspect/Replace
120 and 120 AWD Motor Grader Engine Shutdown Switch - Check
120 and 120 AWD Motor Grader Parking
120 and 120 AWD Motor Grader Battery Disconnect Switch