1984/02/22 Caterpillar


Remanufactured Cylinder Head Assemblies

Usage:


3208 Naturally Aspirated Engines

SUPPLEMENT: 12/00/84

ENGINE NEWS, FEBRUARY 22, 1984.

The article "Remanufactured Cylinder Head Assemblies," does not have complete information. Put a mark through that article and make reference to the article with a similar title in this issue.

--------------- END SUPPLEMENT ---------------

Remanufactured cylinder head assemblies are now available for the above engines. These remanufactured cylinder head assemblies include the complete valve mechanism. Only cylinder heads which are components of the standard groups shown in the chart can be returned as cores. Cylinder heads with cracks can be sent as cores, but all cylinder heads must have the valve mechanisms still assembled. Remanufactured cylinder head assemblies have the same warranty as new cylinder head assemblies.

These remanufactured cylinder head assemblies are only available in the United States and Canada.

Caterpillar Information System:

1984/02/22 New Cylinder Head Assembly Made With A Different Material
1984/02/22 New Water Pump Groups Have Improved Impellers And Shafts
1984/02/22 Housing Assembly Now Has Sleeve To Prevent Housing Damage
1984/02/22 Fuel System Manual Bleed Valve Removed
1984/02/22 Correct Oil Pressure Setting For Marine Transmissions
1984/02/22 Correct Wiring And Fuse Must Be Used For Correct Operation Of Shut-Off Solenoid Group
1984/01/18 Cooling System Conditioner Helps Prevent Cavitation Damage
1984/01/18 Smaller Dowel, Stronger Cover Used On Oil Pump Drive Shaft
1984/01/18 Parts Service Information For Pistons
1984/01/18 Modification Of Control Panel Gives Different Power Source For Overcrank Timer To Prevent Starter Motor Failures
1984/01/18 Inspect Camshaft And Lifters After A Failure In The Valve Mechanism Area
1984/01/18 Drive Block Retainer Plates Are No Longer Used
1984/02/22 3406B Engines Available
1984/02/22 New Service Center For 6V2192 Injection Transducer
1984/02/22 List Of Service Publications
1984/02/22 Some Crankshafts Must Be Tufftride Hardened After A Regrind
1984/02/22 Correct Fuel Line And Elbow Installation Will Prevent Damage To Fuel Manifold And Elbow
1984/02/22 New Overhaul Kit For Sea Water Pump Has Improved Impeller
1984/02/22 Larger Capacity Oil Pan Permits Longer Oil Change Interval
1984/02/22 Engine Will Not Restart Immediately After It Has Been Shut Down
1984/02/22 New Water Temperature Regulator Helps Prevent Engine Overcooling
1984/02/22 Remanufactured Connecting Rod Assemblies
1984/02/22 Procedure To Remove Sharp Edges From Fuel Racks
1984/02/22 New Service Tools Available
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.