G3516 Engines Caterpillar

Engine Design

Usage:

G3516 AL7

Show/hide table




Illustration 1	g03336599
Cylinder and valve location (A) Inlet valves (B) Exhaust valves

Number and arrangement of cylinders ... 60 degree V-16

Valves per cylinder ... 4

Displacement ... 69.1 L (4210 cu in)

Bore ... 170 mm (6.7 inch)

Stroke ... 190 mm (7.5 inch)

Combustion ... Spark Ignited

When the crankshaft is viewed from the flywheel end, the crankshaft rotates in the following direction (standard rotation): ... Counterclockwise

Firing order (Injection sequence)

Standard rotation CCW ... 1, 2, 5, 6, 3, 4, 9, 10, 15, 16, 11, 12, 13, 14, 7, 8

Valve lash

Inlet ... 0.51 mm (0.020 inch)

Exhaust ... 1.27 mm (0.050 inch)

Note: The front end of the engine is opposite the flywheel end of the engine. The left and the right side of the engine are determined from the flywheel end. The number 1 cylinder is the front cylinder on the right side. The number 2 cylinder is the front cylinder on the left side.

Caterpillar Information System:

G3500J Petroleum Engines Air Lines

G3512 Gas Engine Engine Oil Lines

G3500J Petroleum Engines Fuel Lines

G3500J Petroleum Engines Fuel Lines

G3500J Petroleum Engines Exhaust Manifold - Water Cooled

G3500J Petroleum Engines Flywheel Housing Cover

G3500J Petroleum Engines Flywheel Housing Cover

A New NRS Coolant Return Line Clamp is Now Used on Certain C15 and C18 Machine Engines {1380} A New NRS Coolant Return Line Clamp is Now Used on Certain C15 and C18 Machine Engines {1380}

G3500H Generator Set Engine Ignition Timing - Adjust

323F LN and 323F SA Excavator and 323F SA MHPU System Schematic

323F LN and 323F SA Excavator and 323F SA MHPU Connector Contact Description

323F LN and 323F SA Excavator and 323F SA MHPU Solenoid Valve - Test

Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Clean Emissions Module Support - Inspect

C175-16 Locomotive Engine Diesel Exhaust Fluid System - Inspect

Radiator Fan Shaft Bearing Set Screw Inspection and Installation {1353, 1356} Radiator Fan Shaft Bearing Set Screw Inspection and Installation {1353, 1356}

New Speed Sensor Groups Are Now Used on Certain C13, C32, C280, 3176B, 3400E, G3400, 3500, G3500, and G3600 Engines {1907, 1912, 3141, 3175} New Speed Sensor Groups Are Now Used on Certain C13, C32, C280, 3176B, 3400E, G3400, 3500, G3500, and G3600 Engines {1907, 1912, 3141, 3175}

New Speed Sensor Groups Are Now Used on Certain Machine Engines {1907, 1912, 3141, 3175, 4803, 7493} New Speed Sensor Groups Are Now Used on Certain Machine Engines {1907, 1912, 3141, 3175, 4803, 7493}

C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting

G3500J Petroleum Engines Camshaft

G3500J Petroleum Engines Cylinder Head

G3516 Engines Cylinder Block

G3516 Engines Connecting Rod

G3500J Petroleum Engines Turbocharger

CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Rotor - Rotate - Motors with Anti-Friction Bearings