G3500J Petroleum Engines Caterpillar


Flywheel Housing Cover

Usage:

G3520J N22


Illustration 1g06148064

Table 1
Specification for 509-9677 Rear Housing Cover Gp 
Item  Qty  Part  Specification Description 
5F-0304 Plug  Torque to 70 ± 15 N·m (52 ± 11 lb ft)

Caterpillar Information System:

G3500J Petroleum Engines Flywheel Housing Cover
A New NRS Coolant Return Line Clamp is Now Used on Certain C15 and C18 Machine Engines {1380} A New NRS Coolant Return Line Clamp is Now Used on Certain C15 and C18 Machine Engines {1380}
G3500H Generator Set Engine Ignition Timing - Adjust
323F LN and 323F SA Excavator and 323F SA MHPU System Schematic
323F LN and 323F SA Excavator and 323F SA MHPU Connector Contact Description
323F LN and 323F SA Excavator and 323F SA MHPU Solenoid Valve - Test
323F LN and 323F SA Excavator and 323F SA MHPU Sensor Supply - Test
323F LN and 323F SA Excavator and 323F SA MHPU Sensor Signal (PWM) - Test
323F LN and 323F SA Excavator and 323F SA MHPU Sensor Signal (Analog, Active) - Test
323F LN and 323F SA Excavator and 323F SA MHPU Event Codes
323F LN and 323F SA Excavator and 323F SA MHPU Diagnostic Trouble Codes
New Engine Software is Now Used for C18 and C32 on Certain Marine Application Engines {1920} New Engine Software is Now Used for C18 and C32 on Certain Marine Application Engines {1920}
G3500J Petroleum Engines Exhaust Manifold - Water Cooled
G3500J Petroleum Engines Fuel Lines
G3500J Petroleum Engines Fuel Lines
G3512 Gas Engine Engine Oil Lines
G3500J Petroleum Engines Air Lines
G3516 Engines Engine Design
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Clean Emissions Module Support - Inspect
C175-16 Locomotive Engine Diesel Exhaust Fluid System - Inspect
Radiator Fan Shaft Bearing Set Screw Inspection and Installation {1353, 1356} Radiator Fan Shaft Bearing Set Screw Inspection and Installation {1353, 1356}
New Speed Sensor Groups Are Now Used on Certain C13, C32, C280, 3176B, 3400E, G3400, 3500, G3500, and G3600 Engines {1907, 1912, 3141, 3175} New Speed Sensor Groups Are Now Used on Certain C13, C32, C280, 3176B, 3400E, G3400, 3500, G3500, and G3600 Engines {1907, 1912, 3141, 3175}
New Speed Sensor Groups Are Now Used on Certain Machine Engines {1907, 1912, 3141, 3175, 4803, 7493} New Speed Sensor Groups Are Now Used on Certain Machine Engines {1907, 1912, 3141, 3175, 4803, 7493}
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.