Engine Oil Lines
Show/hide table
Illustration 1 | g06148182 |
Show/hide table
Specification for 382-1723 Engine Oil Lines Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 4 | 109-2332 O-Ring Seal | Before assembly , lightly lubricate the bore that is being sealed. |
2 | 2 | 0S-1571 Bolt | Torque to Use the following sequence to tighten the clamp bolts: 1. Snugly tighten the clamp assembly to the tube assembly. 2. Tighten the clamp assembly to the elbow within the mating group. 3. Then, tighten the clamp assembly to the tube assembly. |
3 | 2 | 4F-8965 Bolt |
Caterpillar Information System:
G3500J Petroleum Engines Fuel Lines
G3500J Petroleum Engines Fuel Lines
G3500J Petroleum Engines Exhaust Manifold - Water Cooled
G3500J Petroleum Engines Flywheel Housing Cover
G3500J Petroleum Engines Flywheel Housing Cover
A New NRS Coolant Return Line Clamp is Now Used on Certain C15 and C18 Machine Engines {1380} A New NRS Coolant Return Line Clamp is Now Used on Certain C15 and C18 Machine Engines {1380}
G3500H Generator Set Engine Ignition Timing - Adjust
323F LN and 323F SA Excavator and 323F SA MHPU System Schematic
323F LN and 323F SA Excavator and 323F SA MHPU Connector Contact Description
323F LN and 323F SA Excavator and 323F SA MHPU Solenoid Valve - Test
323F LN and 323F SA Excavator and 323F SA MHPU Sensor Supply - Test
323F LN and 323F SA Excavator and 323F SA MHPU Sensor Signal (PWM) - Test
G3500J Petroleum Engines Air Lines
G3516 Engines Engine Design
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Clean Emissions Module Support - Inspect
C175-16 Locomotive Engine Diesel Exhaust Fluid System - Inspect
Radiator Fan Shaft Bearing Set Screw Inspection and Installation {1353, 1356} Radiator Fan Shaft Bearing Set Screw Inspection and Installation {1353, 1356}
New Speed Sensor Groups Are Now Used on Certain C13, C32, C280, 3176B, 3400E, G3400, 3500, G3500, and G3600 Engines {1907, 1912, 3141, 3175} New Speed Sensor Groups Are Now Used on Certain C13, C32, C280, 3176B, 3400E, G3400, 3500, G3500, and G3600 Engines {1907, 1912, 3141, 3175}
New Speed Sensor Groups Are Now Used on Certain Machine Engines {1907, 1912, 3141, 3175, 4803, 7493} New Speed Sensor Groups Are Now Used on Certain Machine Engines {1907, 1912, 3141, 3175, 4803, 7493}
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
G3500J Petroleum Engines Camshaft
G3500J Petroleum Engines Cylinder Head
G3516 Engines Cylinder Block
G3516 Engines Connecting Rod