Camshaft
Show/hide table
Illustration 1 | g06148613 |
(1) Left-hand camshaft assembly
(2) Right-hand camshaft assembly |
Show/hide table
Specification for 382-5086 Camshaft Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
A | - | - | Thickness of the groove in a new camshaft assembly is |
C | 1 | 5B-5821 Dowel | Extension of the dowel is |
D | 2 | 4N-1650 Dowel | Extension of the dowel is |
E | 2 | 7N-3218 Thrust Washer | Thickness of a new thrust washer is |
F | - | - | Diameter of bearing journals in a new journal camshaft assembly is |
Bore in camshaft bearing after installation is |
|||
3 | 16 | 5P-0076 Bolt | Torque to |
Show/hide table
Illustration 2 | g03203436 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
- | - | - | Use the following procedure to determine the camshaft lobe lift: |
1. Measure camshaft lobe height (H). | |||
2. Measure base circle (J). | |||
3. Subtract the base circle (J) from the camshaft lobe height (H). The difference is the actual camshaft lobe lift. | |||
G | - | - | Specified camshaft lobe lift: |
Inlet lobe is |
|||
Exhaust lobe is |
Caterpillar Information System:
C15 and C18 Engines for Caterpillar Built Machines Alternator Mounting
New Speed Sensor Groups Are Now Used on Certain Machine Engines {1907, 1912, 3141, 3175, 4803, 7493} New Speed Sensor Groups Are Now Used on Certain Machine Engines {1907, 1912, 3141, 3175, 4803, 7493}
New Speed Sensor Groups Are Now Used on Certain C13, C32, C280, 3176B, 3400E, G3400, 3500, G3500, and G3600 Engines {1907, 1912, 3141, 3175} New Speed Sensor Groups Are Now Used on Certain C13, C32, C280, 3176B, 3400E, G3400, 3500, G3500, and G3600 Engines {1907, 1912, 3141, 3175}
Radiator Fan Shaft Bearing Set Screw Inspection and Installation {1353, 1356} Radiator Fan Shaft Bearing Set Screw Inspection and Installation {1353, 1356}
C175-16 Locomotive Engine Diesel Exhaust Fluid System - Inspect
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Clean Emissions Module Support - Inspect
G3516 Engines Engine Design
G3500J Petroleum Engines Air Lines
G3512 Gas Engine Engine Oil Lines
G3500J Petroleum Engines Fuel Lines
G3500J Petroleum Engines Fuel Lines
G3500J Petroleum Engines Exhaust Manifold - Water Cooled
G3500J Petroleum Engines Cylinder Head
G3516 Engines Cylinder Block
G3516 Engines Connecting Rod
G3500J Petroleum Engines Turbocharger
CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Rotor - Rotate - Motors with Anti-Friction Bearings
CN1566, CN2086, CN2586, CN3086, CN3586, CN4086 and CN5086 Electric Motors Rotor - Rotate - Motors with Sleeve Bearings
C32 Marine Propulsion Engine Maintenance Interval Schedule
G3516 Engines Exhaust Bypass Valve
G3500J Petroleum Engines Air Inlet Elbow
G3516 Engines Housing (Front)
C32 Marine Auxiliary Engine Safety Messages
C32 Marine Auxiliary Engine Model View Illustrations