Engine Crankcase Breather - Clean
Show/hide table
TILKYNNING |
---|
Framkvæmið þessa viðhaldsvinnu með dautt á vélinni. |
Show/hide table
Skýringarmynd 1 | g06283576 |
Öndun sveifarhúss C7.1 skipsaflvélar (1) Lok (2) Sía (3) Öndunarbúnaður |
- Komið í veg fyrir að óhreinindi komist í öndunarsamstæðuna. Tryggið að ytra byrði öndunarsamstæðunnar sé hreint og óskemmt. Setjið ílát undir öndunarsamstæðuna.
- Snúið lokinu (1) ofan á rangsælis í opna stöðu. Takið lokið af öndunarhúsinu (3) og takið síuna úr (2).
Show/hide table
Skýringarmynd 2 g06283587 (4) Þétti
(5) Hak - Takið gamla þéttið (4) úr og setjið nýtt í.
Hakið (5) í lokinu að ofan veitir aðgang að þéttinu.
Show/hide tableSkýringarmynd 3 g06283583 Stilling
(A) Stilling
(B) Stilling - Setjið nýja síu í öndunarhúsið (3). Tryggið að sían sitji rétt, sjá skýringarmynd 72. Stillið staðsetningu (A) á lokinu að ofan rétt við
staðsetningu (B) á síunni.
Show/hide tableSkýringarmynd 4 g06283593 (C) Læst staða - Skrúfið lokið (1) á. Snúið lokinu að ofan handvirkt réttsælis þar til það smellur í læsta stöðu (C)á öndunarhúsinu.
- Fjarlægið ílátið.
Show/hide table
Skýringarmynd 5 g06185549 (6) Öndunarslanga
(7) Útstreymi - Leitið eftir skemmdum á öndunarslöngunni (6). Gangið úr skugga um að úttakið (7) sé hreint og óstíflað. Ís getur valdið stíflum í slæmu veðri.
Caterpillar Information System:
C18 Generator Set Engines Piston Cooling Jets - Remove and Install
3516B Generator Set Engines with Dynamic Gas Blending Electrical Connectors
C9.3 Marine Engine Fuel Manifold - Remove and Install - Single Wall Rail
XQP150 Rental Generator Set Model View Illustrations
Installation and Configuration Procedure for an Autonomous Stop (A-Stop) System {7610, 7620} Installation and Configuration Procedure for an Autonomous Stop (A-Stop) System {7610, 7620}
C15 Generator Sets Maintenance Interval Schedule - Standby Generator Sets
C15 Generator Sets Maintenance Interval Schedule - Prime
C15 Generator Sets Maintenance Interval Schedule - Emergency Standby Power
C18 Generator Set Engines Cylinder Liner - Remove and Install
New Exhaust Gaskets Are Used on Certain 3500 Engines {1059} New Exhaust Gaskets Are Used on Certain 3500 Engines {1059}
C13, C15, and C18 Tier 4 Final Engines Diesel Exhaust Fluid Tank
3512E Petroleum Engines General Information (Fuel System)
C9.3 Marine Engine Fuel Manifold (Rail) - Remove and Install - Double Wall Rail
C9.3 Marine Engine Fuel Manifold (Rail) - Remove and Install - Single Wall Rail
C9.3 Marine Engine Transmission Oil Cooler - Remove and Install
XQP150 Rental Generator Set Refill Capacities
C18 Generator Set Engines Piston and Connecting Rods - Remove and Install
XQP150 Rental Generator Set Refill Capacities
XQP150 Rental Generator Set Welding on Engines with Electronic Controls
C18 Generator Set Engines Pistons and Connecting Rods - Disassemble
C18 Generator Set Engines Pistons and Connecting Rods - Assemble
C18 Generator Set Engines Connecting Rod Bearings - Remove and Install
C18 Generator Set Engines Crankshaft Main Bearings - Remove and Install
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Additional Messages