374F Excavator Machine System Caterpillar


Pressure Sensor

Usage:

374F L AP4


Illustration 1g06310585

Table 1
Item  Qty  Part  Specification Description 
Final installation torque is 62 to 68 N·m (46 to 50 lb ft)
Operating voltage is 7 to 14 VDC.
Output type is PWM.
Output frequency is 500 ± 100 Hz.
Duty cycle is below 3% or above 97%. 

Caterpillar Information System:

New Aftercooler Heat Shields Are Used on Certain 3500C Marine Engines {1063} New Aftercooler Heat Shields Are Used on Certain 3500C Marine Engines {1063}
C1.7 and C2.2 Industrial Engines Fuel System Primary Filter/Water Separator - Drain
C1.7 and C2.2 Industrial Engines Fuel System Secondary Filter/Water Separator - Drain
C1.7 and C2.2 Industrial Engine Glow Plug Starting Aid - Test
C1.7 and C2.2 Industrial Engines Severe Service Application
C1.7 and C2.2 Industrial Engine Idle Validation - Test
C1.7 and C2.2 Industrial Engines Engine Oil Pressure Switch - Test
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068} New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
ESS IQ Remote Monitoring Deployment Management
Well Stimulation Pumps Pump (Power End) Lube Oil Pressure - Check
New Coolant Lines Are Now Used For Certain 797B Off-Highway Trucks {1380} New Coolant Lines Are Now Used For Certain 797B Off-Highway Trucks {1380}
C1.7 and C2.2 Industrial Engine Coolant Temperature Is High
C7.1 Commercial Marine Engine Lubrication System
ESS IQ Remote Monitoring Real Time Monitor and Fleet Map
ESS IQ Remote Monitoring Work Orders
C175-20 Locomotive Engine Engine Valve Lash - Adjust
C12.9 Marine Propulsion Engine General Information
C1.7 and C2.2 Industrial Engine Shutdown (Ground Level) - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System Speed Signal - Test
C32 Locomotive Engine Maintenance Interval Schedule
G3512 Generator Set Nitrogen Oxide Sensor - Calibrate
G3508J, G3516J, and G3520J Engines Exhaust Shield - Remove and Install
ESS IQ Remote Monitoring System State Change History
ESS IQ Remote Monitoring Event Logging
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.