Catalyst (SCR) - Replace
Show/hide table
Illustration 1 | g03499577 |
Reactor Housing Cutaway View |
Note: When conducting service on the Clean Emissions Module (CEM) follow all applicable industry standards. Also, follow all applicable governmental, environmental, and safety guidelines, practices, regulations, and mandates for confined spaces.
Refer to the Disassembly and Assembly Manual for information on catalyst replacement.
In order to maximize catalyst life, Caterpillar recommends that the catalysts are replaced based on either engine load factors and service hours or DEF consumption. Refer to table 1 for catalyst replacement based on load factor and service hours. Refer to table 2 for catalyst replacement based on DEF consumption.
Show/hide table
SCR Replacement Intervals Based on Average Load Factor and Hours | |||||
Average Application Load Factor (%) | 10 | 25 | 50 | 75 | 100 |
SCR Replacement Interval (hrs) | 30,000 | 28,000 | 24,000 | 22,000 | 20,000 |
Show/hide table
C280-16 Approximate DEF Consumption Before SCR Replacement | |
Urea Concentration (Percent) | DEF Consumption |
32.5 | |
40 | |
Caterpillar Information System:
C32 Marine Engine Maintenance Interval Schedule - Prime Power
C8.7 Marine Engines Coolant Level Switch
C8.7 Marine Engines Exhaust Temperature Sensor
C280-16 Marine Engines Alarms and Shutoffs
C280-16 Marine Engines Product Storage
C9.3 Marine Engine Fuel Injection Pump - Remove and Install - Right-Hand Simplex and Duplex
C280-16 Marine Engines Product Lifting
C9.3 Marine Engine Relief Valve (Fuel) - Remove and Install - Double Wall Rail
C8.7 Marine Engines Fuel Priming Pump and Primary Fuel Filter
C9.3 Marine Engine Relief Valve (Fuel) - Remove and Install - Single Wall Rail
3406E and C15 Marine Engines Maintenance Interval Schedule - Prime Power
797F Off-Highway Truck Field Assembly Cab - Install
3516C High Displacement Engine Coolant Temperature Is High
Fleet Detect Onboard Displays Used On Certain Cat® Products Have Corruptions In Memory (MSTAR){7490, 7605} Fleet Detect Onboard Displays Used On Certain Cat® Products Have Corruptions In Memory (MSTAR){7490, 7605}
C4.4 and C7.1 Engines ECM - Replace
Marine Selective Catalytic Reduction (SCR) Retrofit Aftertreatment Filter Screen (Air) - Inspect/Clean
C280-16 Marine Engines Filter Screen (DEF) - Inspect/Clean
New Turbocharger Bearing Design Used On Certain 3512 And 3516 Engines {1052, 1053, 1307} New Turbocharger Bearing Design Used On Certain 3512 And 3516 Engines {1052, 1053, 1307}
C4.4 and C7.1 Engines Battery Problem
G3600 Human Machine Interface (HMI) Display General Information
G3600 Human Machine Interface (HMI) Display Specifications
C32 Marine Engine Maintenance Interval Schedule
C9.3 Marine Engine Fuel Injection Pump - Remove and Install - Left-Hand Simplex and Duplex
Installation Procedure for the Insulation Blankets on Certain Retrofit Aftertreatment{1067} Installation Procedure for the Insulation Blankets on Certain Retrofit Aftertreatment{1067}