Fuel Transfer Pump - Remove and Install - Left-Hand Simplex
Show/hide table
Required Tools | |||
Tool | Pat Number | Part Description | Qty |
A | 276-7018 | Plug/Cap Kit | 1 |
Note: All high-pressure fuel line connections to be closed with protective caps from Tooling (A)
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Turn the fuel supply to the OFF position.
Show/hide table
Illustration 1 g03826118 - Remove bolts (4) and clamps (1).
- Remove clamps (2), bolts (6), hose (3), and tube assembly (5).
Show/hide table
Illustration 2 g03826185 - Remove nut (7) and stud (8).
Show/hide table
Illustration 3 g03826193 - Disconnect hose assembly (11), tube assembly (9), and adapter assembly (10).
Show/hide table
Illustration 4 g03826212 - Remove nut (15), stud (13), bolts (14), and fuel transfer pump (12).
Show/hide table
Illustration 5 g03826219 - Remove adapter (16) and adapter (17).
- Install fuel transfer pump (12) in the reverse order of removal.
- Tighten bolts (14) to a torque of
30 ± 4 N·m (266 ± 35 lb in) . - Tighten stud (13) and stud (8) to a torque of
30 ± 4 N·m (266 ± 35 lb in) .
- Tighten bolts (14) to a torque of
Caterpillar Information System:
C4.4 Generator Sets Safety Messages
C9.3 Marine Engine Fuel Transfer Pump - Remove and Install - Right-Hand Simplex and Duplex and Left-Hand Duplex
C4.4 and C7.1 Engines Speed Control - Test - PWM
2015/05/01 A New Controller Is Available for Certain C4.4 Marine Generator Sets {4490}
C4.4 Engines Speed Control - Test - Analog
3512E Tier 4 Final Engines for Land Electric Drilling Clean Fuel Module - Test
2015/06/26 New Software for Product Link PL522 Module Is Now Available for All Cat® Products {7606, 7620}
2015/05/29 A New Oil Pan Is Used on Certain G3600 and C280 Engines {1302}
2015/06/12 New Fuel System Components are Available for Certain G3500 Engines {1274, 1741, 5137}
C9.3 Marine Engine Fuel Lines - Remove and Install - Left-Hand Duplex
C9.3 Marine Engine Fuel Lines - Remove and Install - Left-Hand Simplex
G3500H 60Hz Generator Sets Maintenance Interval Schedule
C175-16 Locomotive Engine ECM Software - Install
2015/04/24 A New Connecting Rod Bolt is Used on 3600, G3600, and C280 Engines {1218}
3524B and C175 Engines for Off-Highway Truck/Tractors Oil Pressure Regulator
PM820, PM822, and PM825 Cold Planer Fuses - Replace
C175-16 Marine Engine Valve Mechanism Cover
SPF343 and SPF343C Trailer Mounted Pumpers Starting the Engine
C9.3 Marine Engine Fuel Manifold - Remove and Install - Double Wall Rail
2015/04/24 Certain Electric Power Generation (EPG) Generator Sets Delivered with Non-Branded Batteries {1401}
Procedure for Installing the Fuel Line Group on Certain C18 Marine Engines with SCAC {1274} Procedure for Installing the Fuel Line Group on Certain C18 Marine Engines with SCAC {1274}
2015/05/15 A New Crankshaft is Available for Certain C4.4 Engines {1202}
3512C HD and 3516C HD Class I Division 2 Hazardous Location Generator Sets Before Starting Engine
2015/06/05 New Turbocharger Used On Certain 3516 Power Modules {1052}