Fuel Filter Housing - Remove and Install
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Remove the fuel filter. Refer to Operation and Maintenance Manual, "Fuel Filter - Change".
Show/hide table
Illustration 1 g03780556 - Disconnect harness assemblies (2) and (6).
- Disconnect hose assemblies (3) and (5).
- Disconnect tube assembly (1). Disconnect fitting assembly (4).
- Using two people, remove bolts (8) and remove fuel filter housing (7). The weight of fuel filter housing (7) is approximately
23 kg (51 lb) .Show/hide tableIllustration 2 g06086973 - Remove starting priority valve (9) and LPFS pressure regulating valve (10).
- Install fuel filter housing (7) in the reverse order of removal.
- Tighten LPFS pressure regulating valve (10) and starting priority valve (9) to a torque of
36 ± 3 N·m (27 ± 2 lb ft) .
- Tighten LPFS pressure regulating valve (10) and starting priority valve (9) to a torque of
Caterpillar Information System:
C3.4B Engines for Caterpillar Built Machines Engine Oil Pressure
C3.4B Industrial Engine Cold Weather Operation
3512E Engines Hydraulic Starting Motor - Remove and Install
G3500H 60Hz Generator Sets Engine Air Cleaner Differential Pressure - Check
465-6933 Major Overhaul Foundational Kit for 3516 Generator Set Engines{1000} 465-6933 Major Overhaul Foundational Kit for 3516 Generator Set Engines{1000}
464-4042 Major Overhaul Foundational Kit for 3516 Generator Set Engines{1000} 464-4042 Major Overhaul Foundational Kit for 3516 Generator Set Engines{1000}
C12 Marine Engines Maintenance Interval Schedule
464-6602 Major Overhaul Foundational Kit for 3516 Generator Set Engines{1000} 464-6602 Major Overhaul Foundational Kit for 3516 Generator Set Engines{1000}
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Ignition Transformer Extender - Replace
465-0679 Major Overhaul Foundational Kit for 3516 Generator Set Engines{1000} 465-0679 Major Overhaul Foundational Kit for 3516 Generator Set Engines{1000}
XGC1900 Generator Sets Compressor Bypass - Check
C13 Industrial Engine Electronic Unit Injector Rocker Arm
G3600 A4 Engines Engine Speed Sensor - Adjust
G3600 A4 Engines Measuring Engine Oil Pressure
G3600 A4 Engines Excessive Engine Oil Consumption - Inspect
G3600 A4 Engines BTU and Precombustion Chamber Adjustments
3512E Engines Air Cleaner - Remove and Install
G3600 A4 Engines Ignition System
C4.4 and C6.6 Engines Valve Lash Is Excessive
C3.3 Industrial Engine Engine Operation
Generators for C15/C18 Engines Mechanical Features
G3600 A4 Engines General Information (Electronic Control System)
G3600 A4 Engines Engine Governing - Adjust
G3600 A4 Engines Pressure Regulating Valve