New Delivery Method for Engine Monitoring System III Software Is Used On Certain 3512C Petroleum Engines {1901, 1920}
- Engine:
- 3512C (S/N: LLA3875-4338)
Description of Change: The Engine Monitoring System (EMS) III software is now flashed using Product Software Programming System (PSPS).
Adaptable To: For EMS III modules displaying 96-6 Fuel Level Sensor : Current Above Normal and 600-8 Hydraulic Oil Temperature Sensor : Abnormal Frequency, Pulse Width, or Period replace the 386-6022 Electronic Control Module and flash the 448-4931 Monitor Software Gp .
LLA04339 is effective with the PSPS flashed software.
Caterpillar Information System:
2014/10/31 Coolant System Venting Recommendations For Certain G3600 Engines {1350, 1380}
PMG3516 Power Module Maintenance Interval Schedule - Prime Power
G3500H 60Hz Generator Sets Engine Oil Filter Differential Pressure - Check
PMG3516 Power Module Maintenance Interval Schedule - Standby
C280 Marine Engines NOx Conversion Is Low
2014/10/17 A New Pressure Regulating Valve Is Used on Certain C18 and C32 Marine Engines Equipped with Air Starters {5503}
G3520H Generator Set Engine Flywheel Housing - Remove and Install
Installation of the New Diesel Exhaust Fluid Filter On Certain Tier 4 Final Applications {108K} Installation of the New Diesel Exhaust Fluid Filter On Certain Tier 4 Final Applications {108K}
C3.4B Engines for Caterpillar Built Machines Flexible Exhaust Pipe - Selective Catalyst Reduction (SCR) Mixer Outlet to Inlet of Selective Catalyst Reduction (SCR) Canister
C3.4B Engines for Caterpillar Built Machines Temperature Sensor (Exhaust) - Selective Catalytic Reduction (SCR) Outlet Temperature Sensor
C3.4B Engines for Caterpillar Built Machines Temperature Sensor (Exhaust) - Selective Catalytic Reduction (SCR) Inlet Temperature Sensor
C3.4B Engines for Caterpillar Built Machines Ammonia Sensor
2014/10/31 New Engine Software Is Used on Certain C32 Engines {1902, 1920}
2014/10/31 New Water Lines Are Used On Certain C32 Marine Engines {1052, 1380}
G3520H Generator Set Engine Transfer Gearbox - Remove
C13 Industrial Engine Engine Cranks but Does Not Start
C13 Industrial Engine Engine Has Mechanical Noise (Knock)
3512E Tier 4 Final Engines for Land Electric Drilling Electrical Power Supply - Test
C175-16 Locomotive Engine Clean Emissions Module Has High Oxygen Level
G3520H Generator Set Engine Transfer Gearbox - Install
C13 Industrial Engine Engine Does Not Crank
C13 Industrial Engine Engine Has Early Wear
C13 Industrial Engine Engine Misfires, Runs Rough or Is Unstable
C13 Industrial Engine Engine Overcrank Occurrence