C4.4 Marine Generator Set Caterpillar


Fuel Pressure Sensor - Remove and Install - Non M.C.S. Duplex Secondary Fuel Filter Base Fuel Pressure Sensor

Usage:

C4.4 NRP

Removal Procedure

  1. Turn the fuel supply to the OFF position.


    Illustration 1g03716455


    Illustration 2g03716453

  2. Disconnect harness assembly (1) from secondary filter base fuel pressure sensor (2).

  3. Remove secondary filter base fuel pressure sensor (2) from elbow connection (3).

  4. Remove O-ring seal (4) from secondary filter base inlet pressure sensor (2).

Installation Procedure



    Illustration 3g03716453


    Illustration 4g03716455

  1. Install a new O-ring seal (4) to secondary filter base inlet pressure sensor (2).

  2. Install the secondary fuel filter base inlet pressure sensor (2) to the elbow connection (3). Tighten pressure sensor to a torque of 10 N·m (89 lb in).

  3. Connect harness assembly (1) to secondary filter base inlet fuel pressure sensor (2).

  4. Turn the fuel supply to the ON position.

Caterpillar Information System:

PM820, PM822, and PM825 Cold Planer Engine and Machine Warm-Up
460-9351 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9351 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
PM620 and PM622 Cold Planer Monitoring System
460-9242 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9242 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620} 368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
3516B Generator Set Engines with Dynamic Gas Blending Engine Misfires, Runs Rough or Is Unstable
2014/11/19 New Diesel Oxidation Catalyst Available for Certain C27 Tier 4 Final Engines {1050, 108D}
C8.7 Marine Engines Rear Gear Group - Time
460-9230 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9230 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
460-9072 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9072 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
2015/07/23 New Copper Lead Main and Connecting Rod Bearings Are Available For All 3500 Diesel Machine Engines {1203, 1219}
3516B Generator Set Engines with Dynamic Gas Blending Power Is Intermittently Low or Power Cutout Is Intermittent
3512C Engine Valve Lifter - Remove and Install
2014/08/15 New Software Is Available for Certain Industrial Engines {1901, 1920}
3516C and C175-16 Engines Selective Catalytic Reduction NOx Sensor Supply - Test
XQC1200 and XQC1600 Power Modules Camshaft - Remove
C4.4 Marine Generator Set Fuel Priming Pump - Remove and Install - M.C.S. Fuel Priming Pump
PM620 and PM622 Cold Planer Cooling Cores - Clean
460-9789 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9789 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
PM620 and PM622 Cold Planer Backup Alarm - Test
PM620 and PM622 Cold Planer Access Doors and Covers
XQC1200 and XQC1600 Power Modules Camshaft - Install
460-9820 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000} 460-9820 Major Overhaul Foundational Kit for 3412 Generator Set Engines{1000}
G3516H and G3520H Generator Set Engines Fuel Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.